Xilinx Kintex-7 USB-FPGA board

ft-usb_config ft-usb_comm ft-hi-speed ddr3 mram

Overview

EDX-008 series is Xilinx's Hi-performance USB-FPGA Kintex-7 board. It's compact and very simple. Single 5.0 V power supply operation. FTDI's FT2232H (Dual channel USB controller IC) is equipped. One channel is available for a user communication interface. The other channel is configured for FPGA configuration and configuration device access.

No download cable is needed with original configuration tool "BBC[EDX-008]".


Revised: Product Revision to Rev2

  • The configuration device on this board is changed to MT25QL128 due to the discontinuance of N25Q064.
    Support for Discontinuing Micron Configuration Memory Device.
  • The production of the Power IC (Enpirion) on the board was discontinued. So the part has been changed to the alternative and the board was revised.
    For more details, please refer to the circuit schematics.

 

Kintex-7 USB-FPGA Board EDX-008
Click to Zoom

Kintex-7 USB-FPGA board EDX-008
Click to Zoom

Block Diagram

Block Diagram EDX-008
Click to Zoom

Specifications

  • FPGA : XILINX Kintex-7
    - XC7K70T-1FBG484C
    - XC7K160T-1FBG484C
    Feature XC7K70T XC7K160T
    Logic Cells 65,600 162,240
    Slice 10,250 25,350
    Maximum Distributed RAM (Kb) 838 2,188
    Maximum user I/O pins (Device) 300 400
    Maximum user I/O pins (Board) 100 100
    Max Block RAM Bits 4,860 11,700
    DSP Slice 240 600
    CMT (MMCMx1+PLLx1) 6 8

    This table is for reference. Please refer to official data-sheets for certain information.

  • Power: 5.0 V single power supply operation
  • DDR3 SDRAM:  MT41J64M16 (Micron, 1Gbit)
  • MRAM: MR2A16AMA35 (Everspin, 4Mbit)
  • 100 I/O PAD 100 mil (2.54 mm) grid
  • Configuration Device:
    Rev2: MT25QL128 (Micron, 128Mbit)
    Rev1: N25Q064 (Micron, 64Mbit)
  • USB control IC (FTDI, FT2232H)
    - FPGA Configuration
    - Configuration device access (Write/Reset/Erase)
    - User communication I/F
    - Free Original Configuration Tool " BBC[EDX-008]"
  • ESD and Surge protection component for USB I/F
  • 50MHz Oscillator (50 ppm) or External inputs
  • User Switch (Push x1, DIP x1bit)
  • User LED x2
  • Status LED (Power, Done)
  • Power-on Reset for FPGA configuration
  • JTAG Connector (7 pin socket) for download cable connection
    - JTAG buffer for stable download or debug
  • High quality six layers PCB.(Immersion gold)
  • Credit-Card-Size 3.386"x 2.126" (86 x 54 mm)
  • Tested all I/O
  • RoHS compliance
  • MADE IN JAPAN

Package Contents

Item Image Quantity
USB-FPGA board (EDX-008) USB-FPGA Board EDX-008 1
USB cable (Type A to B)   1
Pin Headers 2
Sockets 2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Price and Add-ons

Description Model
(order code)
FPGA List price
jpy(JPY)
Stock Status
Kintex-7 USB-FPGA board EDX-008-70T XC7K70T-1FBG484C
Kintex-7 USB-FPGA board EDX-008-160T XC7K160T-1FBG484C
Universal board
with 3.3V10A DC/DC POWER SUPPLY
ZKB-054 -

[]

© HuMANDATA LTD. - Intel (Altera) & Xilinx FPGA Boards manufacturer in Japan - 2017 Sitemap