Intel Cyclone V USB-FPGA board

Cyclone V MRAM ft-usb_config ft-usb_comm ft-hi-speed

Overview

EDA-302 is Intel Hi-performance USB-FPGA Cyclone V board. It's compact and very simple. Single 5.0 V power supply operation. FTDI's FT2232H (Dual channel USB controller IC) is equipped. One channel is available for a user communication interface. The other channel is configured as an I/F for FPGA configuration and configuration device access.

No download cable is needed with original configuration tool " BBC[EDA-302]".

Rev3: The production of the Power IC (Enpirion) on the board was discontinued. So the part has been changed to the alternative and the board was revised. For more details, please refer to the circuit schematics.

CycloneV USB-FPGA Board EDA-302
Click to Zoom

CycloneV USB-FPGA Board EDA-302
Click to Zoom

Block Diagram

Block Diagram EDA-302
Click to Zoom

Specifications

  • Intel 5CEBA4U15C8N
    Feature 5CEBA4U15C8N
    Logic Elements 49 K
    ALM 18,480
    Memory: M10K (kb) 3,080
    Memory: MLAB (kb) 303
    Total Memory (kb) 3,383
    18 x 18 Multipliers 132
    PLLs 4
    Global Clock Networks 16
    Maximum user I/O pins(Device) 224
    Maximum user I/O pins(Board) 56

    This table is for reference. Please refer to official data-sheets for certain information.

  • 5.0 V single power supply operation (External input or USB Bus power)
    - External input is recommended
  • 56 I/O (100 mil (2.54 mm) grid)
  • Configuration Device: N25Q032 (Micron, 32Mbit)
  • USB control IC (FTDI, FT2232H)
    - FPGA Configuration
    - Configuration device access (Write/Reset/Erase)
    - User communication I/F
    - Free Original Configuration Tool " BBC[EDA-302]"
  • ESD and Surge protection component for USB I/F
  • 50MHz Oscillator (50 ppm) or External inputs
  • User Switch (Push x1, DIP x1bit)
  • User LED x4
  • Seven segment LED module x1
  • Status LED (Power, Done)
  • Power-on Reset
  • JTAG Connector(10 pin socket) for download cable connection
    - JTAG buffer for stable download and debug
  • High quality eight layers PCB (Immersion gold)
  • Compact size 2.087" x 2.126" (53 x 54 mm)
  • Tested all I/O
  • RoHS compliance
  • MADE IN JAPAN

Package Contents

Item Image Quantity
USB-FPGA board(EDA-302) CycloneV USB-FPGA Board EDA-302 1
USB cable (Type A to Mini B)   1
Pin Headers 2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Price and Add-ons

Description Model
(order code)
FPGA List price
jpy(JPY)
Stock Status
CycloneV USB-FPGA board EDA-302-A4 5CEBA4U15C8N
Universal board
with 3.3V10A DC/DC POWER SUPPLY
ZKB-054 -

[ ]

© HuMANDATA LTD. - Intel (Altera) & Xilinx FPGA Boards manufacturer in Japan - 2017 Sitemap