Altera Cyclone IV USB-FPGA board

Cyclone IV E ft-usb_config ft-usb_comm ft-hi-speed

Overview

EDA-301 is Altera Corp.'s Hi-performance USB-FPGA Cyclone IV board. It's compact and very simple. 5.0 V external or USB Bus power supply operation. FTDI's FT2232H (Dual channel USB controller IC) is equipped. One channel is available for a user communication interface. The other channel is configured as an I/F for FPGA configuration and configuration device access.

No download cable is needed with original configuration tool " BBC[EDA-301]".


Rev2: The production of the Power IC (Enpirion) on the board was discontinued. So the part has been changed to the alternative and the board was revised. For more details, please refer to the circuit schematics.

CycloneIV USB-FPGA Board EDA-301
Click to Zoom

CycloneIV USB-FPGA Board EDA-301
Click to Zoom

Block Diagram

Block Diagram EDA-301
Click to Zoom

Specifications

  • Altera EP4CE15F17C8N
    Feature EP4CE15F17C8N
    Logic Elements 15,408
    Embedded memory(Kbits) 504
    Embedded 18 x 18 multipliers 56
    PLLs 4
    Global Clock Networks 20
    Maximum user I/O pins(Device) 165
    Maximum user I/O pins(Board) 56

    This table is for reference. Please refer to official data-sheets for certain information.

  • Configuration Device(Altera, EPCS16SI8N)
  • USB control IC (FTDI, FT2232H)
    - FPGA Configuration
    - Configuration device access (Write/Reset/Erase)
    - User communication I/F
    - Free Original Configuration Tool " BBC [EDA-301]"
  • 50MHz Oscillator (50 ppm) or External inputs
  • User Switch (Push x1, DIP x1bit)
  • User LED x4
  • Seven segment LED module x1
  • Status LED (Power, Done)
  • Power-on Reset
  • JTAG Connector(10 pin socket) for download cable connection
  • JTAG buffer for stable download or debug
  • 5.0 V single power supply operation (External input or USB Bus power)
  • High quality six layers PCB (Immersion gold)
  • Compact size 2.087" x 2.126" (53 x 54 mm)
  • ESD and Surge protection component for USB I/F
  • Tested all I/O
  • RoHS compliance
  • MADE IN JAPAN

Package Contents

Item Image Quantity
USB-FPGA board(EDA-301) CycloneIV USB-FPGA Board EDA-301 1
USB cable(Type A to Mini B)   1
Pin Headers 2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Price and Add-ons

Description Model
(order code)
FPGA List price
jpy(JPY)
Stock Status
CycloneIV USB-FPGA board EDA-301 EP4CE15F17C8N
Universal board
with 3.3V10A DC/DC POWER SUPPLY
ZKB-054 -

[]

Copyright © 2017-2024 HuMANDATA LTD. -  Altera (Intel) & AMD (Xilinx) FPGA Boards manufacturer in Japan - All Rights Reserved Sitemap