Spartan-6 USB-FPGA board

ft-usb_config ft-usb_comm ft-hi-speed

Overview

EDX-301 is AMD's Hi-performance USB-FPGA Spartan-6 LX board. It's compact and very simple. 5.0 V external or USB Bus power supply operation. FTDI's FT2232H (Dual channel USB controller IC) is equipped. One channel is available for a user communication interface. The other channel is configured as an I/F for FPGA configuration and configuration device access.

No download cable is needed with original configuration tool " BBC [EDX-301]".

Rev2: The production of the Power IC (Enpirion) on the board was discontinued. So the part has been changed to the alternative and the board was revised.
For more details, please refer to the circuit schematics.

 

Spartan-6 USB-FPGA Board EDX-301
Click to Zoom

Spartan-6 USB-FPGA board EDX-301
Click to Zoom

Block Diagram

Block Diagram EDX-301
Click to Zoom

Specifications

  • FPGA: Spartan-6
    - XC6SLX16-2CSG225C
    FeatureXC6SLX16-2CSG225C
    Slices 2,278
    Logic Cells 14,579
    Maximum Distributed RAM bits 136 K
    Maximum user I/O pins(Device) 232
    Maximum user I/O pins(Board) 56
    Total Block RAM bits 576 K

    This table is for reference. Please refer to official data-sheets for certain information.

  • Configuration Device(Micron, M25P16-VMN)
  • USB control IC (FTDI, FT2232H)
    - FPGA Configuration
    - Configuration device access (Write/Reset/Erase)
    - User communication I/F
    - Free Original Configuration Tool " BBC [EDX-301]"
  • 50MHz Oscillator (50 ppm) or External inputs
  • User Switch (Push x1, DIP x1bit)
  • User LED x4
  • Seven segment LED module x1
  • Status LED (Power, Done)
  • Power-on Reset
  • JTAG Connector(7 pin socket) for download cable connection
  • JTAG buffer for stable download or debug
  • 5.0 V single power supply operation (External input or USB Bus power)
  • High quality six layers PCB.(Immersion gold)
  • Compact size 2.087" x 2.126" (53 x 54 mm)
  • ESD and Surge protection component for USB I/F
  • Tested all I/O
  • RoHS compliance
  • MADE IN JAPAN

Package Contents

ItemImageQuantity
USB-FPGA board(EDX-301) Spartan-6 USB-FPGA Board EDX-301 1
USB cable(Type A to Mini B)   1
Pin Headers 2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Price and Add-ons

DescriptionModel
(order code)
FPGAList price
jpy(JPY)
Stock Status
Spartan-6 USB-FPGA board EDX-301 XC6SLX16-2CSG225C
Universal board
with 3.3V10A DC/DC POWER SUPPLY
ZKB-054 -
Universal board for ACM/XCM-0 series
(Type2)
ZKB-105 -

 

Copyright © 2017-2024 HuMANDATA LTD. -  Altera (Intel) & AMD (Xilinx) FPGA Boards manufacturer in Japan - All Rights Reserved Sitemap