[EDX-009] AMD Kintex-7 USB-FPGA board, FTDI USB 3.0 FT600

Overview

EDX-009 is AMD Hi-performance Kintex-7 USB-FPGA board. EDX-009 is compact and very simple. EDX-009 operates with single 5.0V power supply. An FTDI's FT600 offers USB3.0 bridge to FPGA user communication I/F. An FT232H is mounted for FPGA configuration.

No download cable is needed to configure the FPGA with HuMANDATA original configuration tool "BBC[EDX-009]".

Rev4: The production of the Power IC (Enpirion) on the board was discontinued. So the part has been changed to the alternative and the board was revised.
For more details, please refer to the circuit schematics.

» Please also see other FT600 series products.

Click to Zoom

Click to Zoom

Specifications

• FPGA: AMD Kintex-7
  - XC7K70T-1FBG484C
  - XC7K160T-1FBG484C

  Feature	XC7K70T	XC7K160T
  Logic Cell	65,600	162,240
  Slice	10,250	25,350
  Max Distributed RAM (kb)	838	2,188
  Max Block RAM (kb)	4,860	11,700
  DSP Slice	240	600
  CMT (MMCMx1+PLLx1)	6	8
  Maximum user I/O pins(Device)	300	400
  Maximum user I/O pins(Board)	100	100

  This table is for reference. Please refer to official data-sheets for certain information.

• Power : 5.0 V single power supply operation
  - Separated VCCIO input (VIO(B))
• 100 I/O PAD 100 mil (2.54 mm) grid
• DDR3 SDRAM: MT41K64M16 (Micron, 1Gbit)
  High density is available by a BTO up to 4Gbit
• Configuration Device
  Rev3: Quad SPI ROM : MT25QL128 (Micron, 128Mbit)
  Rev1, 2: Quad SPI ROM: N25Q128 (Micron, 128Mbit)
• USB3.0 bridge IC (FTDI, FT600)
  - User communication I/F
• USB2.0 bridge IC (FTDI, FT232H)
  - User communication I/F
  - FPGA Configuration
  - Configuration device access (Write/Reset/Erase)
  - Free Original Configuration Tool " BBC[EDX-009]"
• ESD protection for USB2.0 I/F
• 50MHz Oscillator (50 ppm)
  - External clock inputs are avairable
• User Switch x2 (Push x1, Slide x1)
• User LED x2
• Status LED x2 (Power, Done)
• Power-on Reset
• JTAG Connector(7 pin socket) for download cable connection
  - JTAG buffer for stable download and debug
• High quality 8 layers PCB (Immersion gold)
• Credit-Card-Size 3.386"x 2.126" (86 x 54 mm)
• Tested all I/O
• RoHS compliance
• MADE IN JAPAN

Package Contents

Item	Image	Quantity
USB-FPGA board (EDX-009)		1
USB3.0 cable (Type A to B)		1
Pin Headers		2
Sockets		2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Documentation

• User's manual, Schematic, etc

Price and Add-ons

Description	Model (order code)	FPGA	List price (JPY)	Stock Status
USB 3.0 with Kintex-7 USB-FPGA board	EDX-009-70T	XC7K70T-1FBG484C
USB 3.0 with Kintex-7 USB-FPGA board	EDX-009-160T	XC7K160T-1FBG484C
Universal board with 3.3V10A DC/DC POWER SUPPLY	ZKB-054	-

Ordering

HOW TO ORDER HuMANDATA PRODUCT