EDX-009 is Xilinx Corp.'s Hi-performance Kintex-7 USB-FPGA board. EDX-009 is compact and very simple. EDX-009 operates with single 5.0V power supply. An FTDI's FT600 offers USB3.0 bridge to FPGA user communication I/F. An FT232H is mounted for FPGA configuration.
No download cable is needed to configure the FPGA with HuMANDATA original configuration tool "BBC[EDX-009]".
|Max Distributed RAM (kb)||838||2,188|
|Max Block RAM (kb)||4,860||11,700|
|Maximum user I/O pins(Device)||300||400|
|Maximum user I/O pins(Board)||100||100|
This table is for reference. Please refer to official data-sheets for certain information.
|USB-FPGA board (EDX-009)||1|
|USB cable (Type A to B)||1|
There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.
|USB 3.0 with Kintex-7 USB-FPGA board||EDX-009-70T||XC7K70T-1FBG484C|
|USB 3.0 with Kintex-7 USB-FPGA board||EDX-009-160T||XC7K160T-1FBG484C|
with 3.3V10A DC/DC POWER SUPPLY