AMD Artix-7 FFG1156 FPGA board
Overview
XCM-211 is an evaluation board equipped with an AMD's high performance FPGA, Artix-7 series (FFG1156 package).
XCM-211 has voltage regulators, an oscillator, user LEDs, switches and a configuration device on its compact credit-card size board.
Only one 3.3V single power supply is needed. There are 296 user I/Os divided into four Vcco groups.
Rev2: The production of the Power IC (Enpirion) on the board was discontinued. So the part has been changed to the alternative and the board was revised.
For more details, please refer to the circuit schematics.
Block Diagram
Typical Eye Diagram
 Click to Zoom |
Channel: 216_3(P) Ref.Clk: 125MHz Rate: 2.5Gbps Swing: 959mVppd (1100) Pre/Post-cursor: 0 dB Data: PRBS-7 |
Specifications
- FPGA: AMD Artix-7
- XC7A200T-1FFG1156CFeature XC7A200T Logic Cells 215,360 Slices 33,650 Maximum Distributed RAM (kb) 2,888 Maximum Block RAM (kb) 13,140 DSP Slices 740 CMT (MMCM x1 + PLL x1) 10 Maximum user I/O pins (Device) 500 Maximum user I/O pins (Board) 296
- User I/O: 296 (HIROSE connectors, 80 pin x2, 100 pin x2)
- IOA (CNA Connector): 64
- IOB (CNB Connector): 64
- IOC (CNC Connector): 84
- IOD (CND Connector): 84 - Separated Vcco input for each connector
- IOA: Fixed to 3.3V input from CNA Connector
- IOB: External input from CNB Connector
- IOC: External input from CNC Connector
- IOD: External input from CND Connector - Transceivers Tx/Rx 2ch
- Transceivers reference clocks: 125 MHz and external input (MMCX connectors) - DDR3 SDRAM: MT41K64M16 (Micron, 1 Gbit)
- Configuration Device: MT25QL128ABA1ESE-0SIT (Micron, 128 Mbit)
- JTAG port (7 pin socket)
- JTAG buffer for stable download and debug - Power: 3.3 V single supply
- Rev2: 0.675 V/1.0 V/1.2 V/1.35 V/1.8 V/2.5 V on-board regulators
- Sequenced power supplies (Power on) - Rev1: 0.75 V/1.0 V/1.2 V/1.5 V/1.8 V/2.5 V on-board regulators
- Sequenced power supplies (Power on)
- Rev2: 0.675 V/1.0 V/1.2 V/1.35 V/1.8 V/2.5 V on-board regulators
- on board clocks
- 50 MHz (LVTTL)
- 200 MHz (LVDS) - Power-on Reset IC for FPGA configuration
- User Switch x2 (Push x1, DIP x1bit)
- User LED x2
- Status LED x2 (Power, Done)
- High quality ten layer PCB. (Immersion gold)
- Credit-Card-Size 3.386"x 2.126" (86 x 54 mm)
- Tested all I/O
- RoHS compliance
- MADE IN JAPAN
Package Contents
| Item | Image | Quantity |
|---|---|---|
| FPGA board (XCM-211-***) |  |
1 |
| Sockets (HIROSE 80P) |  |
2 |
| Sockets (HIROSE 100P) |  |
2 |
There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.
Documentation
Price and Accessories
| Description | Model (order code) |
FPGA | List price (JPY) |
Stock Status |
|---|---|---|---|---|
| Artix-7 FFG1156 FPGA FPGA board | XCM-211-200T | XC7A200T-1FFG1156C | ||
| Universal board for ACM/XCM-1, 2 series (MAX 3.3 V) | ZKB-157 | - |
