Artix-7 F484 FPGA board
Overview
AMD Artix-7 F484 High Performance FPGA Board. XCM-114 is simple and easy to use. It's Compact size. 3.3V single power supply operation.
Rev3: The production of the Power IC (Enpirion) on the board was discontinued. So the part has been changed to the alternative and the board was revised.
For more details, please refer to the circuit schematics.
Rev2: The configuration device on this board is changed to MT25QL128 due to the discontinuance of N25Q064 or N25Q128.
Support for Discontinuing Micron Configuration Memory Device.
Block Diagram
Typical Eye Diagram
 Click to Zoom |
Device: XC7A100T-1FGG484C Data Pattern: PRBS-7 Channel: 0_216(P) Data Rate: 2.5Gbps Reference Clock: 125MHz Diff Swing: 800mV Pre/Post-Emphasis: 0dB |
Specifications
- FPGA: AMD Artix-7
- XC7A35T-1FGG484C
- XC7A50T-1FGG484C
- XC7A75T-1FGG484C
- XC7A100T-1FGG484C
- XC7A200T-1FBG484CFeature XC7A35T XC7A50T XC7A75T XC7A100T XC7A200T Slices 5,200 8,150 11,800 15,850 33,650 Logic Cells 33,280 52,160 75,520 101,440 215,360 Maximum Distributed RAM (Kbits) 400 600 892 1,188 2,888 Maximum Block RAM (Kbits) 1,800 2,700 3,780 4,860 13,140 Maximum user I/O pins (Device) 250 250 250 285 285 Maximum user I/O pins (Board) 128 128 128 128 128 GTP Channel (Device) 4 4 4 4 4 GTP Channel (Board) 2 2 2 2 2 DSP Slices 90 120 180 240 740 CMT (MMCM x1 + PLL x1) 5 5 6 6 10 This table is for reference. Please refer to official data-sheets for certain information.
- 128 user I/Os (with two 80pin HIROSE connectors)
- Separable VCCO (CNB) - Power : 3.3V single supply
Rev3: 0.675/1.0/1.2/1.35/1.8/2.5V are generated by on-board regulators
- Sequenced power supplies (Power on)
Up to Rev2: 0.75/1.0/1.2/1.5/1.8/2.5V are generated by on-board regulators
- Sequenced power supplies (Power on) - Power-on Reset IC for FPGA configuration
- Transceivers reference clocks: 125 MHz and external input (MMCX connectors)
- Transceivers Tx/Rx 2ch.
- DDR3 SDRAM: MT41J64M16 (Micron, 1Gbit)
- Configuration Device: Quad SPI ROM
Rev2 or later: MT25QL128 (Micron, 128Mbit)
Rev1: N25Q064/128 (Micron, 64Mbit/128Mbit) - Clocks: 50MHz Oscillator (50 ppm) and external inputs
- User Switch x2 (Push x1, Slide x1bit)
- User LED x2
- Status LED x2 (Power, Done)
- JTAG port (7 pin socket)
- JTAG buffer for stable download and debug - High quality eight layer PCB (Immersion gold)
- Compact size 1.693" x 2.126" (43 x 54 mm)
- Tested all I/Os
- RoHS compliance
- MADE IN JAPAN
Package Contents
| Item | Image | Quantity |
|---|---|---|
| FPGA Board (XCM-114-***) |  |
1 |
| Sockets (HIROSE 80P) |  |
2 |
There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.
Documentation
Price and Add-ons
| Description | Model (order code) |
FPGA | List price (JPY) |
Stock Status |
|---|---|---|---|---|
| Artix-7 F484 FPGA board | XCM-114-35T | XC7A35T-1FGG484C | ||
| Artix-7 F484 FPGA board | XCM-114-50T | XC7A50T-1FGG484C | ||
| Artix-7 F484 FPGA board | XCM-114-75T | XC7A75T-1FGG484C | ||
| Artix-7 F484 FPGA board | XCM-114-100T | XC7A100T-1FGG484C | ||
| Artix-7 F484 FPGA board | XCM-114-200T | XC7A200T-1FBG484C | ||
| Pitch converter for ACM/XCM-1 series (Type2) | ZKB-078KIT | - | ||
| Pitch Conversion Board for ACM/XCM-1 series (Type3) | ZKB-079 | - | ||
| Pitch converter for ACM/XCM-1 series | ZKB-030KIT | - | ||
| Universal board for ACM/XCM-1 series (Type2) | ZKB-103 | - | ||
| Pitch Conversion Board ACM/XCM-2 series | ZKB-041KIT | - |
