[ACM-116L] Altera Arria 10 GX F672 FPGA board

Overview

ACM-116L is an FPGA board with Altera's High performance FPGA, Arria 10 GX F672. It's compact and very simple. 3.3V single power supply operation.

Rev2: The production of the Power IC (Enpirion) on the board was discontinued. So the part has been changed to the alternative and the board was revised.
For more details, please refer to the circuit schematics.

Click to Zoom

Click to Zoom

Typical Eye Diagram

Specifications

• FPGA: Arria 10 GX
  - 10AX016E4F27E3SG
  - 10AX022E4F27E3SG
  - 10AX027E4F27E3SG
  - 10AX032E4F27E3SG

  Feature	10AX016	10AX022	10AX027	10AX032
  Logic Elements	160K	220K	270K	320K
  Adaptive logic modules (ALMs)	61,510	83,730	101,620	118,730
  ALM registers	246,040	334,920	406,480	474,920
  M20K memory blocks	440	588	750	891
  M20K memory size (Mb)	9	11	15	17
  MLAB memory size (Mb)	1.0	1.8	2.4	2.8
  Variable-precision digital signal processing (DSP) blocks	156	191	830	985
  18x19 Multipliers	312	382	1,660	1,970
  Peak fixed-point peformance (GMACS)	343	420	1,826	2,167
  Peak floating-point performance (GFLOPS)	140	172	747	887
  Maximum user I/O pins (Device)	288	288	384	384
  Maximum user I/O pins (Board)	128	128	128	128

  This table is for reference. Please refer to official data-sheets for certain information.

• 3.3 V single power supply operation
  - 1.8 V, 0.9 V, 1.03 V and 1.35 V are generated on board.
  Note: Power for I/O, VCCOA/VCCOB, is required to be supplied from CNA and CNB.
• Configuration Device : MT25QU256
• 128 user I/O (with two 80pin HIROSE connectors)
  Power for I/O of CNA/CNB, VCCOA/VCCOB, are separated. Each power is required to be supplied externally.
  1.2V, 1.25V, 1.35V, 1.5V, 1.8V is suppored.
  Not all I/O is supported LVDS.
  Please refer to the document for FPGA about each I/O standard.
• On-board Oscillator : 50MHz, 100MHz (CMOS), 100MHz (LVDS)
  - External inputs are available
• DDR3L SDRAM (Micron, 4Gbit)
  MT41K512M8DA-107:P (512M x 8)
• High speed transceivers are connected to user I/O connectors (Tx/Rx pair x2)
  - On-board reference clock (125MHz)
• User Switch x2 (Push x1, DIP x1)
• User LED x2
• Status LED (Power, Done)
• Power-on Reset IC
• JTAG Connector (10 pin socket) for download cable connection
  - JTAG buffer for stable download and debug
• High quality ten layer PCB. (Immersion gold)
• Compact size 1.693" x 2.126" (43 x 54 mm)
• Tested all I/O
• RoHS compliance
• MADE IN JAPAN

Package Contents

Item	Image	Quantity
FPGA Board (ACM-116L-**)		1
Sockets (HIROSE 80P)		2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Documentation

• User's manual, Schematic , etc

Price and Add-ons

Description	Model (order code)	FPGA	List price (JPY)	Stock Status
Arria 10 GX F672 FPGA board	ACM-116L-016	10AX016E4F27E3SG
Arria 10 GX F672 FPGA board	ACM-116L-022	10AX022E4F27E3SG
Arria 10 GX F672 FPGA board	ACM-116L-027	10AX027E4F27E3SG
Arria 10 GX F672 FPGA board	ACM-116L-032	10AX032E4F27E3SG
Universal board for ACM/XCM-1L, 2L series (MAX 1.8 V)	ZKB-157L	-
Pitch Conversion Board for ACM/XCM-1 series (Type4)	ACC-043	-

Ordering

HOW TO ORDER HuMANDATA PRODUCT