[XCM-211] Xilinx Artix-7 FFG1156 FPGA board

Last Updated: Tuesday, 13 November 2018

Xilinx Artix-7 FFG1156 FPGA board

Kintex-7.png DDR3 SDRAM Rocketio.pngeye2

Overview

XCM-211 is an evaluation board equipped with a XILINX's high performance FPGA, Artix-7 series (FFG1156 package).
XCM-211 has voltage regulators, an oscillator, user LEDs, switches and a configuration device on its compact credit-card size board.
Only one 3.3V single power supply is needed. There are 296 user I/Os divided into four Vcco groups.

xilinx fpga board XCM-211
Click to Zoom

xilinx fpga board XCM-211
Click to Zoom

Block Diagram

XCM-211BLKDGM
Click to Zoom

Typical Eye Diagram

XCM-211_eye_diagram
Click to Zoom
Channel: 216_3(P)
Ref.Clk: 125MHz
Rate: 2.5Gbps
Swing: 959mVppd (1100)
Pre/Post-cursor: 0 dB
Data: PRBS-7

Specifications

  • Xilinx Artix-7
    - XC7A200T-1FFG1156C
    Feature XC7A200T
    Logic Cells 215,360
    Slices 33,650
    Maximum Distributed RAM (kb) 2,888
    Maximum Block RAM (kb) 13,140
    DSP Slices 740
    CMT (MMCM x1 + PLL x1) 10
    Maximum user I/O pins (Device) 500
    Maximum user I/O pins (Board) 296
This table is for reference. Please refer to official data-sheets for certain information.
  • User I/O : 296 (HIROSE connectors, 80 pin x2, 100 pin x2)
    - IOA (CNA Connector) : 64
    - IOB (CNB Connector) : 64
    - IOC (CNC Connector) : 84
    - IOD (CND Connector) : 84
  • Separated Vcco input for each connector
    - IOA : Fixed to 3.3V input from CNA Connector
    - IOB : External input from CNB Connector
    - IOC : External input from CNC Connector
    - IOD : External input from CND Connector
  • RocketIO Tx/Rx 2ch
    - RocketIO reference clocks: 125 MHz and external input (MMCX connectors)
  • DDR3 SDRAM: MT41K64M16 (Micron, 1 Gbit)
  • Configuration Device :MT25QL128ABA1ESE-0SIT (Micron, 128 Mbit)
  • JTAG port (7 pin socket)
    - JTAG buffer for stable download and debug
  • Power : 3.3 V single supply
    - 1.0 V/1.2 V/1.5 V/1.8 V/2.5 V on-board regulators
    - Sequenced power supplies (Power on)
  • on board clocks
    - 50 MHz (LVTTL)
    - 200 MHz (LVDS)
  • Power-on Reset IC for FPGA configuration
  • User Switch x2 (Push x1, DIP x1bit)
  • User LED x2
  • Status LED x2 (Power, Done)
  • High quality ten layers PCB. (Immersion gold)
  • Credit-Card-Size 3.386"x 2.126" (86 x 54 mm)
  • Tested all I/O
  • RoHS compliance
  • MADE IN JAPAN

Package Contents

Item Image Quantity
FPGA board (XCM-211-***) xilinx fpga board XCM-211 1
Sockets (HIROSE 80P) HIROSE80 2
Sockets (HIROSE 100P) HIROSE100 2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Price and Accessories

Description Model
(order code)
FPGA List price
jpy(JPY)
Stock Status
Artix-7 FFG1156 FPGA  FPGA board XCM-211-200T XC7A200T-1FFG1156C
Universal board for ACM/XCM-2 series ZKB-051 -
Universal board for ACM/XCM-2 series (Type3) ZKB-153 -

[ ]

© HuMANDATA LTD. - Intel (Altera) & Xilinx FPGA Boards manufacturer in Japan - 2017 Sitemap