Xilinx Spartan-6 LXT FGG484 FPGA board
*This series was discontinued.
Overview
XCM-020 is an evaluation board equipped with a XILINX's high performance FPGA, Spartan-6 LXT series (FG484 package).
XCM-020 series have voltage regulators, oscillators, user LEDs, switches, and a configuration device on its compact credit-card size board.
Only one 3.3 V single power supply is needed. There are 100 user I/Os devices into two Vcco groups.
By using SIF40 connector with ACC series, you can utilize GTP transceiver (RocketIO), high speed serial interface.
Block Diagram
Typical Eye Diagram
|
Channel：101_0(P)
Ref.Clk：125MHz
Rate：2.5Gbps
Swing：785mV
Pre-emphasis: 0%
Data: PRBS-7
|
Specifications
- Xilinx XC6SLX45T-2FGG484C or XC6SLX100T-2FGG484C or XC6SLX150T-2FGG484C
Feature XC6SLX45T XC6SLX100T XC6SLX150T Slices 6,822 15,822 23,038 Logic Cells 43,661 101,261 147,443 Maximum Distributed RAM (Kbits) 401 976 1,355 Maximum user I/O pins (Device) 296 498 540 Maximum user I/O pins (Board) 100 100 100 Total Block RAM Bits 2,088 4,824 4,824 DCMs 8 12 12 PLLs 4 6 6 DSP Slices 58 180 180 This table is for reference. Please refer to official data-sheets for certain information.
- 100 user I/O, 100 mil (2.54 mm) dual in-line.
- 3.3 V single power supply operation with on-board 1.2 V/2.5 V/1.8 V/0.9 V regulators
- On-board Oscillator (30MHz and 50MHz)
- DDR2 SDRAM (Micron: MT47H32M16HR-25E:G, 512Mbit)
- MRAM (Everspin: MR2A16AYS35, 4Mbit)
- Configuration device (Micron: M25P64, 64 Mbit)
- Four User Switches (Push x2, Slide x2)
- Eight User LEDs
- Two Status LEDs (Power, Done)
- Power-on Reset IC for FPGA configuration
- JTAG port (7 pin socket)
- JTAG buffer for stable download and debug
- High quality eight layers PCB. (Immersion gold)
- Credit-Card-Size 3.386"x 2.126" (86 x 54 mm)
- Tested all I/O
- Non-use of 6 Restricted substances of RoHS directive
- MADE IN JAPAN
Package Contents
| Item | Image | Quantity |
|---|---|---|
| FPGA board (XCM-020-***) |  |
1 |
| Pin Headers |  |
2 |
| Sockets |  |
2 |
There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.
Documentation
Price and Accessories
| Description | Model (order code) |
FPGA | List price (JPY) |
Stock Status |
|---|---|---|---|---|
| Spartan-6 LXT FGG484 FPGA board | XCM-020-45T | XC6SLX45T-2FGG484C DDR2+MRAM |
||
| Spartan-6 LXT FGG484 FPGA board | XCM-020-100T | XC6SLX100T-2FGG484C DDR2+MRAM |
||
| Spartan-6 LXT FGG484 FPGA board | XCM-020-150T | XC6SLX150T-2FGG484C DDR2+MRAM |
||
| Universal board for ACM/XCM-0 series | ZKB-054 | - | ||
| Universal board for ACM/XCM-0 series (Type2) | ZKB-105 | - | ||
| SIF40 to SMA Conversion Board | ACC-009 | - | ||
| SIF40 to MMCX Conversion Board | ACC-010 | - | ||
| SIF40 to SATA Conversion Board | ACC-011 | - |
[ ]
EDA-013 is Intel Corp.'s High performance USB-FPGA Cyclone 10 LP board.
XCM-212L is an evaluation board equipped with a XILINX's high performance FPGA, Kintex-7 ( FBG676 package).