[EDX-008] Kintex-7 USB-FPGA board

Overview

EDX-008 series is AMD's Hi-performance USB-FPGA Kintex-7 board. It's compact and very simple. Single 5.0 V power supply operation. FTDI's FT2232H (Dual channel USB controller IC) is equipped. One channel is available for a user communication interface. The other channel is configured for FPGA configuration and configuration device access.

No download cable is needed with original configuration tool "BBC[EDX-008]".

Revised: Product Revision to Rev2

• The configuration device on this board is changed to MT25QL128 due to the discontinuance of N25Q064.
  Support for Discontinuing Micron Configuration Memory Device.
• The production of the Power IC (Enpirion) on the board was discontinued. So the part has been changed to the alternative and the board was revised.
  For more details, please refer to the circuit schematics.

Click to Zoom

Click to Zoom

Specifications

• FPGA: Kintex-7
  - XC7K70T-1FBG484C
  - XC7K160T-1FBG484C

  Feature	XC7K70T	XC7K160T
  Logic Cells	65,600	162,240
  Slice	10,250	25,350
  Maximum Distributed RAM (Kb)	838	2,188
  Maximum user I/O pins (Device)	300	400
  Maximum user I/O pins (Board)	100	100
  Max Block RAM Bits	4,860	11,700
  DSP Slice	240	600
  CMT (MMCMx1+PLLx1)	6	8

  This table is for reference. Please refer to official data-sheets for certain information.

• Power: 5.0 V single power supply operation
• DDR3 SDRAM:  MT41J64M16 (Micron, 1Gbit)
• MRAM: MR2A16AMA35 (Everspin, 4Mbit)
• 100 I/O PAD 100 mil (2.54 mm) grid
• Configuration Device:
  Rev2: MT25QL128 (Micron, 128Mbit)
  Rev1: N25Q064 (Micron, 64Mbit)
• USB control IC (FTDI, FT2232H)
  - FPGA Configuration
  - Configuration device access (Write/Reset/Erase)
  - User communication I/F
  - Free Original Configuration Tool " BBC[EDX-008]"
• ESD and Surge protection component for USB I/F
• 50MHz Oscillator (50 ppm) or External inputs
• User Switch (Push x1, DIP x1bit)
• User LED x2
• Status LED (Power, Done)
• Power-on Reset for FPGA configuration
• JTAG Connector (7 pin socket) for download cable connection
  - JTAG buffer for stable download or debug
• High quality six layers PCB. (Immersion gold)
• Credit-Card-Size 3.386"x 2.126" (86 x 54 mm)
• Tested all I/O
• RoHS compliance
• MADE IN JAPAN

Package Contents

Item	Image	Quantity
USB-FPGA board (EDX-008)		1
USB cable (Type A to B)		1
Pin Headers		2
Sockets		2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Documentation

• User's manual, Schematic , etc

Price and Add-ons

Description	Model (order code)	FPGA	List price (JPY)	Stock Status
Kintex-7 USB-FPGA board	EDX-008-70T	XC7K70T-1FBG484C
Kintex-7 USB-FPGA board	EDX-008-160T	XC7K160T-1FBG484C
Universal board with 3.3V10A DC/DC POWER SUPPLY	ZKB-054	-
Universal board for ACM/XCM-0 series (Type2)	ZKB-105	-

Ordering

HOW TO ORDER HuMANDATA PRODUCT