Altera Cyclone III USB-FPGA board
*This series was discontinued.
Overview
EDA-004Z is Altera's Hi-performance FPGA Cyclone III board. It's compact and very simple. 5.0V single external power supply operation.
You can configure the FPGA device using HuMANDATA original programming software BBC[EDA-004].
EDA-004Z is derived from EDA-004 by removing an MRAM.
Block Diagram
Specifications
- Altera EP3C55F780C8N(Cyclone III FPGA 55K LE)
Feature EP3C55F780C8N Logic Elements 55856 PLLs 4 Maximum user I/O pins(Device) 377 Maximum user I/O pins(Board) 100 M9K RAM blocks 260 RAM bits 2,396,160 Multipliers 156 This table is for reference. Please refer to official data-sheets for certain information.
- Power : 5.0 V single supply
- 1.2 V/2.5 V/3.3 V on-board regulators
- USB Bus-power is not available - Configuration Device(Altera, 16 Mbit)
- Resister-protected 100 I/O, PAD 100 mil (2.54 mm) grid
- FPGA configuration through JTAG
- FPGA configuration through USB
- User communication through USB
(FT2232H Sync-FIFO mode is available) - 50 MHz Oscillator(50 ppm)or External input
- User Switch (Push x1)
- User LED x3
- Status LED (Power, Done)
- Power-on Reset signal for FPGA configuration
- JTAG port(10 pin socket) for ByteBlaster[MV/II] or USB Blaster
- High quality six layers PCB.(Immersion gold)
- Credit-Card-Size 3.386" x 2.126" (86 x 54 mm)
- ESD and Surge protection for USB
- Tested all I/O
- Non-use of 6 Restricted substances of RoHS directive
- MADE IN JAPAN
Package Contents
| Item | Image | Quantity |
|---|---|---|
| FPGA board (EDA-004Z) |  |
1 |
| USB cable (Type A to B) | 1 | |
| Pin Headers |  |
2 |
| Sockets |  |
2 |
There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.
Documentation
Price and Add-ons
| Description | Model (order code) | FPGA | List price (JPY) | Stock Status |
|---|---|---|---|---|
| Cyclone III USB-FPGA board | EDA-004Z | EP3C55F780C8N | ||
| Universal board with 3.3V10A DC/DC POWER SUPPLY |
ZKB-054 | - |
[ ]
EDA-013 is Intel Corp.'s High performance USB-FPGA Cyclone 10 LP board.
XCM-212L is an evaluation board equipped with a XILINX's high performance FPGA, Kintex-7 ( FBG676 package).