BBC[EDX-008] : Configuration Tool for EDX-008

Last Updated: Tuesday, 27 November 2018

Bit-Bang Configuration

HuMANDATA original configuration tool "BBC[EDX-008]" offers you

  • FPGA Configuration
  • Configuration Memory Access (Write/Read/Erase)

without special download cables.
BBC[EDX-008] requires just only .bit file for both operations, no need to prepare mcs file for configuration device.
Software project file and source codes is also offered for customizing. (Borland C++ Builder XE2)

BBC[EDX-008] is tested under these OS below,

  • Windows XP
  • Windows 7
  • Windows 8
  • Windows 8.1
  • Windows 10

Command Tab


When the "Target" is selected as "FPGA"...

  • Action = Configuration : Download a circuit data file into FPGA.
  • Action = Reset : Reset the FPGA. FPGA will go into a state when it is powered up.

When the "Target" is selected as "ROM"...

  • Action = Program : Program a file (*.bit) into a configuration device.
  • Action = Erase Only : Erase a configuration device. To minimize erase time, the first sector will be erased.


  • [...] : Open a .bit file to use.
  • Dir : A parts of file address path except a file name.
  • File : A file name to use.
  • Always Front : Keep the app window always front.

Option Tab

  • Use default port description : When checked, BBC uses default USB description of EDX-008 to detect a device.
  • Save Setting (ini file) : When checked, some settings (etc. file path) will be saved and restored at next execution.
  • Show System Message : When checked, detail information will be showed.


  Version File
BBC[EDX-008] tool V14 Download
Project File (Borland C++ Builder XE2) V14 Request

2014/08/18: Release

If you have questions or requests, please contact us.

[ ]

© HuMANDATA LTD. - Intel (Altera) & Xilinx FPGA Boards manufacturer in Japan - 2017 Sitemap