Arria 10 GX F672 FPGA board

Arria_10_GX 

Overview

ACM-116L is an FPGA board with Altera's High performance FPGA, Arria 10 GX F672. It's compact and very simple. 3.3V single power supply operation.


Rev2: The production of the Power IC (Enpirion) on the board was discontinued. So the part has been changed to the alternative and the board was revised.
For more details, please refer to the circuit schematics.

 

Arria 10 GX F672 FPGA board ACM-116L
Click to Zoom

Arria 10 GX F672 FPGA board ACM-116L
Click to Zoom

Block Diagram

Block Diagram
Click to Zoom

Typical Eye Diagram

Block Diagram
Click to Zoom

  • Channel: CNA(P)
  • Ref.Clk: 125MHz
  • Rate: 2.5Gbps
  • VOD Setting: 31
  • Pre-emphasis 1st post-tap: -5
  • Data: PRBS-7
  • Device: 10AX016E4F27E3SG


Click to Zoom

  • Channel: CNB(P)
  • Ref.Clk: 125MHz
  • Rate: 2.5Gbps
  • VOD Setting:31
  • Pre-emphasis 1st post-tap: -5
  • Data: PRBS-7
  • Device: 10AX016E4F27E3SG

Specifications

  • FPGA: Arria 10 GX
    - 10AX016E4F27E3SG
    - 10AX022E4F27E3SG
    - 10AX027E4F27E3SG
    - 10AX032E4F27E3SG
    Feature 10AX016 10AX022 10AX027 10AX032
    Logic Elements 160K 220K 270K 320K
    Adaptive logic modules (ALMs) 61,510 83,730 101,620 118,730
    ALM registers 246,040 334,920 406,480 474,920
    M20K memory blocks 440 588 750 891
    M20K memory size (Mb) 9 11 15 17
    MLAB memory size (Mb) 1.0 1.8 2.4 2.8
    Variable-precision digital
    signal processing (DSP) blocks
    156 191 830 985
    18x19 Multipliers 312 382 1,660 1,970
    Peak fixed-point peformance (GMACS) 343 420 1,826 2,167
    Peak floating-point performance (GFLOPS) 140 172 747 887
    Maximum user I/O pins (Device) 288 288 384 384
    Maximum user I/O pins (Board) 128 128 128 128

    This table is for reference. Please refer to official data-sheets for certain information.

  • 3.3 V single power supply operation
    - 1.8 V, 0.9 V, 1.03 V and 1.35 V are generated on board.
    Note: Power for I/O, VCCOA/VCCOB, is required to be supplied from CNA and CNB.
  • Configuration Device : MT25QU256
  • 128 user I/O (with two 80pin HIROSE connectors)
    Power for I/O of CNA/CNB, VCCOA/VCCOB, are separated. Each power is required to be supplied externally.
    1.2V, 1.25V, 1.35V, 1.5V, 1.8V is suppored.
    Not all I/O is supported LVDS.
    Please refer to the document for FPGA about each I/O standard.
  • On-board Oscillator : 50MHz, 100MHz (CMOS), 100MHz (LVDS)
    - External inputs are available
  • DDR3L SDRAM (Micron, 4Gbit)
    MT41K512M8DA-107:P (512M x 8)
  • High speed transceivers are connected to user I/O connectors (Tx/Rx pair x2)
    - On-board reference clock (125MHz)
  • User Switch x2 (Push x1, DIP x1)
  • User LED x2
  • Status LED (Power, Done)
  • Power-on Reset IC
  • JTAG Connector (10 pin socket) for download cable connection
    - JTAG buffer for stable download and debug
  • High quality ten layer PCB. (Immersion gold)
  • Compact size 1.693" x 2.126" (43 x 54 mm)
  • Tested all I/O
  • RoHS compliance
  • MADE IN JAPAN

Package Contents

Item Image Quantity
FPGA Board (ACM-116L-**) Intel Arria 10 GX ACM-116L 1
Sockets (HIROSE 80P) HIROSE80 2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Price and Add-ons

Description Model
(order code)
FPGA List price
jpy (JPY)
Stock Status
Arria 10 GX F672 FPGA board ACM-116L-016 10AX016E4F27E3SG
Arria 10 GX F672 FPGA board ACM-116L-022 10AX022E4F27E3SG
Arria 10 GX F672 FPGA board ACM-116L-027 10AX027E4F27E3SG
Arria 10 GX F672 FPGA board ACM-116L-032 10AX032E4F27E3SG
Universal board for ACM/XCM-1L, 2L series (MAX 1.8 V) ZKB-157L -
Pitch Conversion Board for ACM/XCM-1 series (Type4) ACC-043 -

[ ]

Copyright © 2017-2024 HuMANDATA LTD. -  Altera (Intel) & AMD (Xilinx) FPGA Boards manufacturer in Japan - All Rights Reserved Sitemap