Xilinx Artix UltraScale+ FPGA board

Overview

Xilinx Artix UltraScale+ FFVB676 High Performance FPGA Board. XCM-117L is simple and easy to use. It's Compact size. 3.3V single power supply operation.

Xilinx Artix-7 F484 FPGA board XCM-117L
Click to Zoom

Xilinx Artix-7 F484 FPGA board XCM-117L
Click to Zoom

Block Diagram

Block Diagram XCM-117L
Click to Zoom

Typical Eye Diagram

XCM-117L_eye_diagram
Click to Zoom
Channel: 224_X0Y0(P)
Ref.Clk: 125MHz
Rate: 2.5Gbps
Swing: 950mVppd (1100)
Pre/Post-cursor: 0 dB
Data: PRBS-7
Trigger: Rising Edge
Signal Path: ZKB-154

Specifications

  • Artix UltraScale+
    - XCAU20P-1FFVB676E
    - XCAU25P-1FFVB676E
    Feature Artix UltraScale+
    XCAU20P XCAU25P
    System Logic Cells 238,437 308,437
    CLB Flip-Flops 218,000 282,000
    CLB LUTs 109,000 141,000
    Maximum Distributed RAM (Mb) 3.2 4.7
    Block RAM Blocks 200 300
    Block RAM (Mb) 7.0 10.5
    UltraRAM Blocks - -
    UltraRAM (Mb) - -
    CMTs (1MMCM,2PLLs) 3 4
    DSP Slices 900 1,200
    System Monitor 1 1
    Max HD I/O (Device) 72 96
    Max HD I/O (Board) 64 64
    Max HP I/O (Device) 156 208
    Max HP I/O (Board) 64 64

    This table is for reference. Please refer to official data-sheets for certain information.

  • 128 user I/Os (with two 80pin HIROSE connectors)
      CNA: 64 user I/O (HD) / CNB: 64 user I/O (HP)
    * External power is needed for I/O (VCCOA/VCCOB)
    * HD = High-density I/O with support for I/O voltage from 1.2V to 3.3V.
    * HP = High-performance I/O with support for I/O voltage from 1.0V to 1.8V.
  • Power : 3.3V, VCCOA, VCCOB
    - VCCINT, 0.9V, 1.2V, 1.8V, 1.35V, 0.675V are generated by on-board regulators
    - Sequenced power supplies (Power on)
  • on board clocks
    - 50 MHz, 200 MHz (LVDS)
    - External inputs(CNA/CNB)
  • Separable VCCO
  • GTY Transceivers
    TX/RX 2ch.
    reference clocks: 125 MHz and external input (MMCX connectors)
  • Configuration Device:
    Quad SPI ROM : MT25QU128 (Micron, 128Mbit)
  • DDR3L SDRAM: MT41K64M16TW-107:P (Micron, 1Gbit)
  • Power-on Reset IC for FPGA configuration
  • User Switch x 2 (Push x1, DIP x1bit)
  • User LED x 1
  • Status LED x2 (Power, Done)
  • JTAG port (7 pin socket)
  • JTAG buffer for stable download and debug
  • Controlled I/O path length
  • High quality ten layer PCB (Immersion gold)
  • Compact size 1.693" x 2.126" (43 x 54 mm)
  • Tested all I/Os
  • RoHS compliance
  • MADE IN JAPAN

Package Contents

Item Image Quantity
FPGA Board (XCM-117L-***) Xilinx Virtex-5 FFG676 FPGA board XCM-117L 1
Sockets (HIROSE 80P) HIROSE80 2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Price and Add-ons

Description Model
(order code)
FPGA List price
jpy(JPY)
Stock Status
Artix UltraScale+ FFVB676 FPGA board XCM-117L-20P XCAU20P-1FFVB676E
Artix UltraScale+ FFVB676 FPGA board XCM-117L-25P XCAU25P-1FFVB676E
Universal board for ACM/XCM-1L, 2L series (MAX 1.8 V) ZKB-157L -
Pitch Conversion Board for ACM/XCM-1 series (Type4) ACC-043 -

[ ]

Copyright © 2017-2024 HuMANDATA LTD. -  Altera (Intel) & AMD (Xilinx) FPGA Boards manufacturer in Japan - All Rights Reserved Sitemap