5″ Color LCD Display Module with Touch Panel
Overview
UTL-025 is a 5 inch TFT Color LCD Module with 800 x 480 pixels and resistive touch panel. It operates from single DC 3.3 V power supply.
UTL-025 has a Seiko Epson Corp.'s LCD controller (S1D13781). You can use it and control UTL-025 by SPI mode or Indirect 8 bit mode. And also a piezo buzzer is equipped to make sounds and beep.
UTL-025 covered with a plastic bezel, so you can easily to build it to other devices.
*This series was discontinued.
Black (front)
Gray (front)
Rear (illustration)
Set up Example: Slits on plastic bezel help to guide position of buttons placed on a fixture.
Specifications
| Item | Specifications | Remark |
|---|---|---|
| Power | DC 3.3±5% [V] | |
| LCD | Size: 5 inches Resolution: 800 x 480 pixels Active Area : 108.0 x 64.8 [mm] Display Colour: 256 LED Back-light unit is included |
|
| Controller | S1D13781 | Seiko Epson Corp. |
| Touch panel | Resistive membrane system | AD7843 (Analog Devices, Inc.) |
| Piezobuzzer | Piezoelectric | 4kHz (Center frequency) |
| I/F | MIL 30pin Connector | LVTTL SPI or 8 bit control |
| Dimensions | 139(W) x 100(H) x 10(D) [mm] | excluding projections |
Package Contents
| Item | Image | Quantity |
|---|---|---|
| UTL-025-** |  |
1 |
There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.
Documentation
Price and Add-ons
| Description | Model (order code) |
List price (JPY) |
Stock Status |
|---|---|---|---|
| 5″ Color LCD Display Module with Touch Panel (Black) | UTL-025-BK | ||
| 5″ Color LCD Display Module with Touch Panel (Gray) | UTL-025-GY | ||
30pin Flat cable for UTL-025 |
UTL-025-CA1 |
Ordering
HOW TO ORDER HuMANDATA PRODUCT
[]
EDA-013 is Intel Corp.'s High performance USB-FPGA Cyclone 10 LP board.
XCM-212L is an evaluation board equipped with a XILINX's high performance FPGA, Kintex-7 ( FBG676 package).