BBC[EDA-008] : Configuration Tool for EDA-008
HuMANDATA original configuration tool "BBC[EDA-008]" offers you
- FPGA Configuration
- Configuration Memory Access (Write/Read/Erase)
without special download cable.
BBC[EDA-008] requires just only .rbf file for both operations, no need to prepare mcs file for configuration device.
Software project file and source codes is also offered for customizing. (Borland C++ Builder XE2)
BBC[EDA-008] is tested under these OS below, and is not supported for Mac and Linux.
- Windows XP
- Windows 7 (64bit)
- Windows 10
2014/06/27: Release
2014/11/19: Upgrade download file from V21 to V31.
Contents
Item | Explanation |
---|---|
Dir | Directory address |
File | File Name |
... | Open configuration file |
Target | Choose the target |
Configuration | Start Operation |
Option Tab
Item | Explanation |
---|---|
Use default port description | Set default product descriptions of EDA-008 |
Save Setting (ini file) |
File path, checkbox setting and port descriptions are saved. |
Show System Message | - |
FPGA Reset | - |
Generate RBF file
Please refer below to generate RBF file with Quartus II.
(1) Open [Assignments] Menu then Click [Device]
(2) Click [Device and Pin Options]
-Click to enlarge-
(3) Open [Programming Files] then check [Raw Binary File (rbf)]
-Click to enlarge-
Download
Version | File | |
---|---|---|
BBC[EDA-008] tool | V40 | ![]() |
Project File (Borland C++ Builder XE2 | V40 | Request |
Simple configuration application "BitCfg3" is here. (FPGA configuration only, VC++6.0 project)
If you have questions or requests, please contact us.
[ ]