<Press Release>
New Product : Altera Cyclone III USB-FPGA board 
Jun. 18, 2012 Release
HuMANDATA LTD., a manufacturer of various FPGA/CPLD boards in Japan, today released EDA-004Z of USB-FPGA board powered by Altera Corp.'s Cyclone III FPGA (EP3C55F780C8N).
HuMANDATA's EDA-004Z is equipped with Altera high-spec Cyclone IV E FPGA on credit-card size (54 x 86mm) PCB. A configuration device, on-board oscillators, a user switche and LEDs are mounted as minimum components of FPGA design and development.
The EDA-004Z provides 100 user I/Os, which are divided into two I/O banks. FTDI's FT2232H (Dual channel USB controller IC) is equipped. One channel is available for a user communication interface. The other channel is configured as an I/F for FPGA configuration and configuration device access.
No download cable is needed with original configuration tool " BBC [EDA-004]".
HuMANDATA’s ACM/XCM series boards are designed on same PCB size and connector layout. So it is easy to swap the board to another one, and you can quickly try a new FPGA/CPLD.
EDA-004Z is compliant with the RoHS Directive, and is designed for lead-free soldering.
Click to Zoom : https://www.hdl.co.jp/EDA-301/top.600.jpg
High resolution image for press (0.60 MBytes) :https://www.hdl.co.jp/press/2012/12E0074.jpg
Specifications:
- Altera Cyclone III (EP3C55F780C8N)
-
Power : 5.0 V single supply
- 1.2 V/2.5 V/3.3 V on-board regulators
- USB Bus-power is not available - Configuration Device (Altera, 16 Mbit)
- Resister-protected 100 I/O, PAD 100 mil (2.54 mm) grid
- FPGA configuration through JTAG
- FPGA configuration through USB
-
User communication through USB
(FT2232H Sync-FIFO mode is available) - 50MHz Oscillator (50 ppm) or External inputs
- User Switch (Push x1)
- User LED x3
- Status LED (Power, Done)
- Power-on Reset signal for FPGA configuration
- JTAG port(10 pin socket) for ByteBlaster[MV/II] or USB Blaster
- High quality six layers PCB (Immersion gold)
- Credit-Card-Size 3.386" x 2.126" (86 x 54 mm)
- ESD and Surge protection component for USB I/F
- Tested all I/O
- Non-use of 6 Restricted substances of RoHS directive
- MADE IN JAPAN
Go to product page
About HuMANDATA:
HuMANDATA is a manufacturer of high quality FPGA/CPLD board in Japan.
- Basic and simple features
- Single power supply operation
- Same size/connector layout –ACM/XCM -AP/XP series
- Free download technical documents before purchasing
- High quality and highly reliable board from Japan
- Stocked items are ready to ship immediately
Contacts:
1-2-10-2F Nakahozumi, Ibaraki, Osaka, 5670034, Japan
TEL +81-72-620-2002(Japanese)
FAX +81-72-620-2003(Japanese / English )
URL
[]
