New Product : Intel Cyclone 10 GX FPGA board - ACM-501L

Jan. 30, 2024 Release

HuMANDATA LTD., the manufacturer of various FPGA boards in Japan, today released ACM-501L series equipped with Intel Cyclone 10 GX FPGA.

HuMANDATA's ACM-501L is equipped with Intel high-spec Cyclone 10 GX FPGA on a compact, 65 x 65 mm PCB. ACM-501L series have voltage regulators, oscillators, user LEDs, user switches, a configuration device and a DDR3L SDRAM on its compact size board.
Only one 3.3 V single power supply is needed. There are 128 user I/Os divided into two I/O groups.

HuMANDATA's ACM/XCM series boards are designed on same PCB size and connector layout. So it is easy to swap the board to another one, and you can quickly try a new FPGA/CPLD.

ACM-501L is compliant with the RoHS Directive, and is designed for lead-free soldering.

Click to Zoom : https://www.hdl.co.jp/ACM-501L/top.602.jpg

High resolution image for press (1.63MBytes) : https://www.hdl.co.jp/press/2023/23D0264/23D0264.jpg

Specifications:

• FPGA: Cyclone 10 GX
  - 10CX105YF672I5G
  - 10CX150YF672I5G
  - 10CX220YF672I5G
• 3.3 V single power supply operation
  - 1.8 V, 0.9 V, 1.03, 1.35 V and 0.675 V are generated on board.
  Note: Power for I/O, VIOLA/VIOLB, is required to be supplied from CNA and CNB.
• Configuration Device : MT25QU256
• User I/O : 128 (samtec connectors, 140 pin x2)
  Power for I/O of VCCOA/VCCOB, are separated. Each power is required to be supplied externally.
  1.2V, 1.25V, 1.35V, 1.5V, 1.8V is suppored.
  Not all I/O is supported LVDS.
  Please refer to the document for FPGA about each I/O standard.
• On-board Oscillator : 50MHz, 100MHz
  - External inputs are available
• DDR3L SDRAM (Micron, 4Gbit)
  MT41K512M8DA-107:P (512M x 8)
• High speed transceivers are connected to user I/O connectors (Tx/Rx pair x4)
  - Reference clocks: 125 MHz
  - Pair of Tx/Rx is led out to each connector
    CNA: TX/RX 4ch
    CNB: TX/RX 4ch
  - Reference clock can be input from CNA/CNB connector
• High speed connector of samtec ERF8/ERM8 is adopted
• User Switch x2 (Push x1, DIP x1)
• User LED x2
• Status LED (Power, Done)
• Power-on Reset IC
• JTAG Connector (10 pin socket) for download cable connection
  - JTAG buffer for stable download and debug
• High quality ten layer PCB. (Immersion gold)
• Size: 2.559"x 2.559" (65 x 65 mm)
• Tested all I/O
• RoHS compliance
• MADE IN JAPAN

About HuMANDATA:

HuMANDATA is a manufacturer of high quality FPGA/CPLD board in Japan.

- Basic and simple features
- Single power supply operation
- Same size/connector layout –ACM/XCM -AP/XP series
- Free download technical documents before purchasing
- High quality and highly reliable board from Japan
- Stocked items are ready to ship immediately

Contacts:

1-2-10-2F Nakahozumi, Ibaraki, Osaka, 5670034, Japan
TEL +81-72-620-2002(Japanese)
FAX +81-72-620-2003(Japanese / English )
URL