Kintex-7 FPGA board

Kintex-7 DDR3 Transceiverseye


AMD Kintex-7 FBG676 High Performance FPGA Board. XCM-501 has voltage regulators, an oscillator, user LEDs, switches and a configuration device on its compact size board.
There are 128 user I/Os divided into two Vcco groups.


Click to Zoom

Click to Zoom

Block Diagram

Block Diagram XCM-501
Click to Zoom

Typical Eye Diagram

Click to Zoom
Channel: MGT_TXAP0
Ref.Clk: 125MHz
Rate: 6.25Gbps
Data: PRBS-7
Trigger: Rising Edge
Signal Path: ZKB-155
Click to Zoom
Channel: MGT_TXBP0
Ref.Clk: 125MHz
Rate: 6.25Gbps
Data: PRBS-7
Trigger: Rising Edge
Signal Path: ZKB-155


  • Kintex Kintex-7
    - XC7K160T-1FBG676C
    - XC7K325T-1FBG676C
    - XC7K410T-1FBG676C
    Feature XC7K160T XC7K325T XC7K410T
    Logic Cells 162,240 326,080 406,720
    Slice 25,350 50,950 63,550
    Maximum Distributed RAM (kb) 2,188 4,000 5,663
    Total Block RAM (kb) 11,700 16,020 28,620
    DSP Slices 600 840 1,540
    CMT (MMCMx1+PLLx1) 8 10 10
    GTX Channel (Device) 4 8 8
    GTX Channel (Board) 4 8 8
    Max user I/O (Device) 400 500 500
    Max user I/O (Board) 128 128 128

    This table is for reference. Please refer to official data-sheets for certain information.

  • User I/O : 128 (samtec connectors, 140 pin x2)
    * External power is needed for I/O (VCCOA/VCCOB)
  • Power : 3.3V,
    - 1.0V, 1.2V, 1.35V, 0.675V, 1.8V, 2.0V on-board regulators
    - Power for I/O (VIOLA/VIOLB) is needed to be supplied from CNA and CNB
    - Sequenced power supplies (Power on)
  • Separable VCCO (CNA/CNB)
  • GTX Transceivers
    - Reference clocks: 125 MHz (LVDS)
    - Pair of Tx/Rx is led out to each connector
      CNA: TX/RX 4ch
      CNB: TX/RX 4ch
    - Reference clock can be input from CNA/CNB connector
  • High speed connector of samtec ERF8/ERM8 is adopted
    MT41K256M16 (Micron, 4 Gbit) x 2 (=32bit wide)
  • Configuration Device:
    Quad SPI ROM: MT25QL128 (Micron, 128Mbit)
  • on board clocks
    - 50 MHz, 100 MHz (LVDS) or External inputs
  • Power-on Reset IC for FPGA configuration
  • User Switch x 2 (Push x1, DIP x1bit)
  • User LED x 2
  • Status LED x2 (Power, Done)
  • JTAG port (7 pin socket)
  • JTAG buffer for stable download and debug
  • Configuration device
  • High quality eight layer PCB (Immersion gold)
  • Size: 2.559"x 2.559" (65 x 65 mm)
  • Tested all I/Os
  • RoHS compliance

Package Contents

Item Image Quantity
FPGA Board (XCM-501-***) XCM-501 1
Sockets (samtec 140P) 2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Price and Add-ons

Description Model
(order code)
FPGA List price
Stock Status
Kintex-7 FPGA board XCM-501-160T XC7K160T-1FBG676C
Kintex-7 FPGA board XCM-501-325T XC7K325T-1FBG676C
Kintex-7 FPGA board XCM-501-410T XC7K410T-1FBG676C
Universal board for ACM/XCM-5 series (MAX3.3V) ZKB-155 -


Copyright © 2017-2024 HuMANDATA LTD. -  Altera (Intel) & AMD (Xilinx) FPGA Boards manufacturer in Japan - All Rights Reserved Sitemap