AMD Kintex-7 FBG484 FPGA board
Overview
XCM-022 is an evaluation board equipped with an AMD's high performance FPGA, Kintex-7 series (FBG484 package).
XCM-022 series have voltage regulators, oscillators, user LEDs, switches, and a configuration device on its compact credit-card size board.
Only one 3.3 V single power supply is needed. There are 100 user I/Os divided into two Vcco groups.
By using SIF40 connector with ACC series, you can utilize GTP transceiver.
Rev3: The production of the Power IC (Enpirion) on the board was discontinued. So the part has been changed to the alternative and the board was revised.
For more details, please refer to the circuit schematics.
Rev2: The configuration device on this board is changed to MT25QL128 due to the discontinuance of N25Q064.
Support for Discontinuing Micron Configuration Memory Device.
Block Diagram
Typical Eye Diagram
 Click to Zoom |
Device: XC7K70T-1FBG484C Channel：3_115 Ref.Clk：125MHz Rate：2.5Gbps Swing：800mV Data Pattern: PRBS-7 Pre/Post-Emphasis: 0dB |
Specifications
- FPGA: AMD Kintex-7
- XC7K70T-1FBG484C
- XC7K160T-1FBG484CFeature XC7K70T XC7K160T Slices 10,250 25,350 Logic Cells 65,600 162,240 Maximum Distributed RAM (Kbits) 838 2,188 Maximum Block RAM (Kbits) 4,860 11,700 Maximum user I/O pins (Device) 300 400 Maximum user I/O pins (Board) 100 100 GTX Channel (Device) 4 4 GTX Channel (Board) 4 4 DSP Slices 240 600 CMT (MMCMx1+PLLx1) 6 8 This table is for reference. Please refer to official data-sheets for certain information.
- 100 user I/O, 100 mil (2.54 mm) dual in-line.
- Separable VCCO - Power : 3.3 V single supply
- 1.0 V/1.2 V/1.5 V/1.8V/2.5 V on-board regulators
- Controlled power supply (on sequence) - On-board Oscillator (50MHz, 200MHz)
- Transceiver reference clock (125 MHz, 150MHz, External input via MMCX connector)
- Transceiver Tx/Rx 4ch. (SIF40 Interface)
- DDR3 SDRAM: MT41J64M16 (Micron, 1Gbit)
- MRAM: MR2A16AMA35 (Everspin, 4Mbit)
- Configuration device:
Rev2: MT25QL128 (Micron, 128Mbit)
Rev1: N25Q064 (Micron, 64Mbit) - User Switch (Push x1, Slide x1)
- User LED x2
- Status LED (Power, Done)
- Power-on Reset IC for FPGA configuration
- JTAG port (7 pin socket)
- JTAG buffer for stable download and debug
- High quality eight layers PCB. (Immersion gold)
- Credit-Card-Size 3.386"x 2.126" (86 x 54 mm)
- Tested all I/O
- Non-use of 6 Restricted substances of RoHS directive
- MADE IN JAPAN
Package Contents
| Item | Image | Quantity |
|---|---|---|
| FPGA board (XCM-022-***) |  |
1 |
| Pin Headers |  |
2 |
| Sockets |  |
2 |
There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.
Documentation
Price and Accessories
| Description | Model (order code) |
FPGA | List price (JPY) |
Stock Status |
|---|---|---|---|---|
| Kintex-7 FBG484 FPGA board | XCM-022-70T | XC7K70T-1FBG484C | ||
| Kintex-7 FBG484 FPGA board | XCM-022-160T | XC7K160T-1FBG484C | ||
| Heatsink for FPGA #1 | MBA23001-X01 | - | ||
| Universal board for ACM/XCM-0 series | ZKB-054 | - | ||
| Universal board for ACM/XCM-0 series (Type2) | ZKB-105 | - | ||
| SIF40 to SMA Conversion Board | ACC-009 | - | ||
| SIF40 to MMCX Conversion Board | ACC-010 | - | ||
| SIF40 to SATA Conversion Board | ACC-011 | - |
[
]
