EDX-008 series is Xilinx's Hi-performance USB-FPGA Kintex-7 board. It's compact and very simple. Single 5.0 V power supply operation. FTDI's FT2232H (Dual channel USB controller IC) is equipped. One channel is available for a user communication interface. The other channel is configured for FPGA configuration and configuration device access.
No download cable is needed with original configuration tool "BBC[EDX-008]".
|Maximum Distributed RAM (Kb)||838||2,188|
|Maximum user I/O pins (Device)||300||400|
|Maximum user I/O pins (Board)||100||100|
|Max Block RAM Bits||4,860||11,700|
This table is for reference. Please refer to official data-sheets for certain information.
|USB-FPGA board (EDX-008)||1|
|USB cable (Type A to B)||1|
There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.
|Kintex-7 USB-FPGA board||EDX-008-70T||XC7K70T-1FBG484C|
|Kintex-7 USB-FPGA board||EDX-008-160T||XC7K160T-1FBG484C|
with 3.3V10A DC/DC POWER SUPPLY