Xilinx Kintex UltraScale / UltraScale+ FPGA board

  Transceivers

Overview

Xilinx Kintex UltraScale FBVA676 or Kintex UltraScale+ FFVA676 High Performance FPGA Board. XCM-116L is simple and easy to use. It's Compact size. 3.3V single power supply operation.

Xilinx Artix-7 F484 FPGA board XCM-116L
Click to Zoom

Xilinx Artix-7 F484 FPGA board XCM-116L
Click to Zoom

Block Diagram

Block Diagram XCM-116L
Click to Zoom

Typical Eye Diagram

XCM-116L_eye_diagram
Click to Zoom
Channel: 224_X0Y0(P)
Ref.Clk: 125MHz
Rate: 2.5Gbps
Swing: 950mVppd (1100)
Pre/Post-cursor: 0 dB
Data: PRBS-7
Trigger: Rising Edge
Signal Path: ZKB-106 (MMCX)

Specifications

  • Kintex UltraScale
    - XCKU035-1FBVA676C
    - XCKU040-1FBVA676C
  • Kintex UltraScale+
    - XCKU3P-1FFVA676E
    - XCKU5P-1FFVA676E
    Feature UltraScale UltraScale+
    XCKU035 XCKU040 XCKU3P XCKU5P
    System Logic Cells 444,343 530,250 355,950 474,600
    CLB Flip-Flops 406,256 484,800 325,440 433,920
    CLB LUTs 203,128 242,400 162,720 216,960
    Maximum Distributed RAM (Mb) 5,9 7,0 4.7 6.1
    Block RAM Blocks 540 600 360 480
    Block RAM (Mb) 19.0 21.1 12.7 16.9
    UltraRAM Blocks - - 48 64
    UltraRAM (Mb) - - 13.5 18.0
    CMTs (1MMCM,2PLLs) 10 10 4 4
    I/O DLLs 40 40 - -
    DSP Slices 1,700 1,920 1,368 1,824
    System Monitor 1 1 1 1
    Max HR/HP I/O (Device) 104/208 104/208 - -
    Max HR/HP I/O (Board) 64+64 64+64    
    Max HD/HP I/O (Device) - - 48/208 48/208
    Max HD/HP I/O (Board) - - 46+82 46+82

    This table is for reference. Please refer to official data-sheets for certain information.

  • 128 user I/Os (with two 80pin HIROSE connectors)
    - Kintex UltraScale
      CNA: 64 user I/O(HR)*
      CNB: 64 user I/O(HP)*
    - Kintex UltraScale+
      CNA: 46 user I/O (HD)* + 18 user I/O (HP)*
      CNB: 64 user I/O (HP)*
    - Separable VCCO (CNA/CNB)
    * HR = High-range I/O with support for I/O voltage from 1.2V to 3.3V.
    * HP = High-performance I/O with support for I/O voltage from 1.0V to 1.8V.
    * HD = High-density I/O with support for I/O voltage from 1.2V to 3.3V.
  • Power : 3.3V, VCCOA, VCCOB
    - 1.0/1.2/1.5/2.5V are generated by on-board regulators
    - Sequenced power supplies (Power on)
  • Separable VCCO
  • Configuration Device:
    Quad SPI ROM : MT25QU128 (Micron, 128Mbit)
  • 50 MHz, 200 MHz Oscillator (50 ppm) or External inputs
  • RocketIO reference clocks: 125 MHz and external input (MMCX connectors)
  • RocketIO Tx/Rx 2ch.
  • DDR3 SDRAM: MT41K256M16TW-107:P (Micron, 4Gbit)
  • Power-on Reset IC for FPGA configuration
  • User Switch x 1 (DIP x1bit)
  • User LED x 1
  • Status LED x2 (Power, Done)
  • JTAG port (7 pin socket)
  • JTAG buffer for stable download and debug
  • Configuration device
  • High quality ten layer PCB (Immersion gold)
  • Compact size 1.693" x 2.126" (43 x 54 mm)
  • Tested all I/Os
  • RoHS compliance
  • MADE IN JAPAN

Package Contents

Item Image Quantity
FPGA Board (XCM-116L-***) Xilinx Virtex-5 FFG676 FPGA board XCM-116L 1
Sockets (HIROSE 80P) HIROSE80 2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Documentation

Price and Add-ons

Description Model
(order code)
FPGA List price
jpy(JPY)
Stock Status
Kintex UltraScale FPGA board XCM-116L-035 XCKU035-1FBVA676C
Kintex UltraScale FPGA board XCM-116L-040 XCKU040-1FBVA676C
Kintex UltraScale+ FPGA board XCM-116L-3P XCKU3P-1FFVA676E
Kintex UltraScale+ FPGA board XCM-116L-5P XCKU5P-1FFVA676E
Universal board for ACM/XCM-1L, 2L series (MAX 1.8 V) ZKB-157L -
Pitch Conversion Board for ACM/XCM-1 series (Type4) ACC-043 -

Ordering

HOW TO ORDER HuMANDATA PRODUCT

 


[ ]