5″ Color LCD Display Module with Touch Panel
UTL-025 is a 5 inch TFT Color LCD Module with 800 x 480 pixels and resistive touch panel. It operates from single DC 3.3 V power supply.
UTL-025 has a Seiko Epson Corp.'s LCD controller (S1D13781). You can use it and control UTL-025 by SPI mode or Indirect 8 bit mode. And also a piezo buzzer is equipped to make sounds and beep.
UTL-025 covered with a plastic bezel, so you can easily to build it to other devices.
Set up Example: Slits on plastic bezel help to guide position of buttons placed on a fixture.
|Power||DC 3.3±5% [V]|
Size: 5 inches
Resolution: 800 x 480 pixels
Active Area : 108.0 x 64.8 [mm]
Display Colour: 256
LED Back-light unit is included
|Controller||S1D13781||Seiko Epson Corp.|
|Touch panel||Resistive membrane system||AD7843 (Analog Devices, Inc.)|
|Piezobuzzer||Piezoelectric||4kHz (Center frequency)|
|I/F||MIL 30pin Connector||
SPI or 8 bit control
|Dimensions||139(W) x 100(H) x 10(D) [mm]||excluding projections|
There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.
Price and Add-ons
|5″ Color LCD Display Module with Touch Panel (Black)||UTL-025-BK|
|5″ Color LCD Display Module with Touch Panel (Gray)||UTL-025-GY|
30pin Flat cable for UTL-025