UTL-021 is a 5 inch TFT Color LCD Module with 800 x 480 pixels resistive touch panel.It operates from single DC 3.3 V power supply.
This module has a plastic bezel, so you can easily to build it to other devices. It has a piezo buzzer to make sounds.
Pin layout of I/F connector is based on discontinued product TRDB-LTM (Terasic).
Set up Example: Slits on plastic bezel help to guide position of buttons placed on a fixture.
|Power||DC 3.3±5% [V]|
Size: 5 inches
Resolution: 800 x 480 pixels
Active Area : 108.0 x 64.8 [mm]
Display Colour: RGB 8 bit (16.7M)
DCLK Freq: 33.5 MHz (typ), 45MHz (MAX)
LED Back-light unit is included
|Touch panel||Resistive membrane system||AD7843 (Analog Devices)|
|Piezobuzzer||Piezoelectric||4kHz (Center frequency)|
|I/F||MIL 50pin Connector||
Based on TRDB-LTM
(Terasic), 1 to 40pin
|Dimensions||139(W) x 100(H) x 10(D)[mm]||excluding projections|
|50pin Flat cable 300 [mm] typ.||1|
There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.
|5″ Color LCD Display Module with Touch Panel (Black)||UTL-021-BK|
|5″ Color LCD Display Module with Touch Panel (Gray)||UTL-021-GY|
40pin Y-Cable for UTL-021