Performance evaluation report : ACC-009
Eye-diagram epsification differencies between ways of connection
ACC-009 converts HuMANDATA's SIF40 standard interface into SMA connectors.
For your reference, please see the following Eye-diagram and specifications when we use ACC-009 to ouput fast serial transceiver(Tx) signals from the SIF40 connector.
Most pictures are available to zoom.
ACM-024 is used as a signal generator for measurement. The ACC-009 is connected to ACM-024's SIF40 connector to output fast serial signals.
 |
Signal Spec: Channel: 0(P) |
| Between Gen and Oscillo | Eye Diagram | Jitter Analysis |
|---|---|---|
 Direct |
|
 |
|
|
 |
|
 conversion board ＋ ACC-009 |
 |
 |
These datas show you transmission characteristics measured by network analyzer. The one of measured differential pair is connected to analyzer and the another is terminated by 50 Ohm resister.
| Connection (Single Side) | result (S21) | Note |
|---|---|---|
Direct |
|
for calibration |
|
|
 |
|
conversion board ＋ ACC-009 |
 |
[ ]