Xilinx Kintex-7 FFG900 FPGA board

Kintex-7.png DDR3 SDRAM

Overview

XCM-209 is an evaluation board equipped with a XILINX's high performance FPGA, Kintex-7 series (FFG900 package).
XCM-209 has voltage regulators, an oscillator, user LEDs, switches and a configuration device on its compact credit-card size board.
Only one 3.3V single power supply is needed. There are 296 user I/Os divided into four Vcco groups.


Vivado Design/System license is required to develop this board.
The free "WebPack" version does not support the FPGA device of this board.


Rev2: The configuration device on this board is changed to MT25QL128 or MT25QL256 due to the discontinuance of N25Q128 or N25Q256.

 

xilinx fpga board XCM-209
Click to Zoom

xilinx fpga board XCM-209
Click to Zoom

Block Diagram

XCM-209BLKDGM
Click to Zoom

 

Specifications

  • Xilinx Kintex-7
    - XC7K325T-1FFG900C
    - XC7K410T-1FFG900C
    Feature XC7K325T XC7K410T
    Logic Cells 326,080 406,720
    Slices 50,950 63,550
    Maximum Distributed RAM (kb) 4,000 5,663
    Maximum Block RAM (kb) 16,020 28,620
    DSP Slices 840 1,540
    CMT (MMCM x1 + PLL x1) 10 10
    Maximum user I/O pins (Device) 500 500
    Maximum user I/O pins (Board) 296 296
This table is for reference. Please refer to official data-sheets for certain information.
  • User I/O : 296 (HIROSE connectors, 80 pin x2, 100 pin x2)
    - IOA (CNA Connector) : 64
      (Some of the IOA are connected HP bank with level conversion ICs.)
    - IOB (CNB Connector) : 64
    - IOC (CNC Connector) : 84
    - IOD (CND Connector) : 84
  • Separated Vcco input for each connector
    - IOA : Fixed to 3.3V input from CNA Connector
    - IOB : External input from CNB Connector
    - IOC : External input from CNC Connector
    - IOD : External input from CND Connector
  • DDR3 SDRAM: MT41K64M16 (Micron, 1Gbit)
    High density is available by a BTO up to 4Gbit
  • Configuration Device
    Rev2: Quad SPI ROM : MT25QL128 or MT25QL256 (Micron, 128/256 Mbit)
    Rev1: Quad SPI ROM: N25Q128 or N25Q256 (Micron, 128/256 Mbit)
  • JTAG port (7 pin socket)
    - JTAG buffer for stable download and debug
  • Power : 3.3V single supply
    - 1.0V/1.5 V/1.8 V/2.0 V on-board regulators
    - Sequenced power supplies (Power on)
  • on board clocks
    - 50 MHz (LVCMOS)
    - 200 MHz (LVDS)
  • Power-on Reset IC for FPGA configuration
  • User Switch x2 (Push x1, DIP x1bit)
  • User LED x2
  • Status LED x2 (Power, Done)
  • High quality ten layer PCB. (Immersion gold)
  • Credit-Card-Size 3.386"x 2.126" (86 x 54 mm)
  • Tested all I/O
  • RoHS compliance
  • MADE IN JAPAN

Package Contents

Item Image Quantity
FPGA board (XCM-209-***) xilinx fpga board XCM-209 1
Sockets (HIROSE 80P) HIROSE80 2
Sockets (HIROSE 100P) HIROSE100 2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Documentation

Price and Accessories

Description Model
(order code)
FPGA List price
jpy(JPY)
Stock Status
Kintex-7 FGG900 FPGA board XCM-209-325T XC7K325T-1FFG900C
Kintex-7 FGG900 FPGA board XCM-209-410T XC7K410T-1FFG900C
Universal board for ACM/XCM-1, 2 series (MAX 3.3 V) ZKB-157 -

Ordering

HOW TO ORDER HuMANDATA PRODUCT

 


[ ]