Xilinx Artix-7 F484 FPGA board

Transceivers

Overview

Xilinx Artix-7 F484 High Performance FPGA Board. XCM-114 is simple and easy to use. It's Compact size. 3.3V single power supply operation.


Rev3: The production of the Power IC (Enpirion) on the board was discontinued. So the part has been changed to the alternative and the board was revised.
For more details, please refer to the circuit schematics.

Rev2: The configuration device on this board is changed to MT25QL128 due to the discontinuance of N25Q064 or N25Q128.
Support for Discontinuing Micron Configuration Memory Device.

Xilinx Artix-7 F484 FPGA board XCM-114
Click to Zoom

Xilinx Artix-7 F484 FPGA board XCM-114
Click to Zoom

Block Diagram

Block Diagram XCM-114
Click to Zoom

Typical Eye Diagram

XCM-114_eye_diagram
Click to Zoom
Device: XC7A100T-1FGG484C
Data Pattern: PRBS-7
Channel: 0_216(P)
Data Rate: 2.5Gbps
Reference Clock: 125MHz
Diff Swing: 800mV
Pre/Post-Emphasis: 0dB

Specifications

  • Xilinx XC7A35T-1FGG484C, XC7A50T-1FGG484C, XC7A75T-1FGG484C, XC7A100T-1FGG484C or XC7A200T-1FBG484C
    Feature XC7A35T XC7A50T XC7A75T XC7A100T XC7A200T
    Slices 5,200 8,150 11,800 15,850 33,650
    Logic Cells 33,280 52,160 75,520 101,440 215,360
    Maximum Distributed RAM (Kbits) 400 600 892 1,188 2,888
    Maximum Block RAM (Kbits) 1,800 2,700 3,780 4,860 13,140
    Maximum user I/O pins (Device) 250 250 250 285 285
    Maximum user I/O pins (Board) 128 128 128 128 128
    GTP Channel (Device) 4 4 4 4 4
    GTP Channel (Board) 2 2 2 2 2
    DSP Slices 90 120 180 240 740
    CMT (MMCM x1 + PLL x1) 5 5 6 6 10

    This table is for reference. Please refer to official data-sheets for certain information.

  • 128 user I/Os (with two 80pin HIROSE connectors)
    - Separable VCCO (CNB)
  • Power : 3.3V single supply
    Rev3: 0.675/1.0/1.2/1.35/1.8/2.5V are generated by on-board regulators
    - Sequenced power supplies (Power on)
    Up to Rev2: 0.75/1.0/1.2/1.5/1.8/2.5V are generated by on-board regulators
    - Sequenced power supplies (Power on)
  • Power-on Reset IC for FPGA configuration
  • RocketIO reference clocks: 125 MHz and external input (MMCX connectors)
  • RocketIO Tx/Rx 2ch.
  • DDR3 SDRAM: MT41J64M16 (Micron, 1Gbit)
  • Configuration Device: Quad SPI ROM
    Rev2 or later: MT25QL128 (Micron, 128Mbit)
    Rev1: N25Q064/128 (Micron, 64Mbit/128Mbit)
  • Clocks: 50MHz Oscillator (50 ppm) and external inputs
  • User Switch x2 (Push x1, Slide x1bit)
  • User LED x2
  • Status LED x2 (Power, Done)
  • JTAG port (7 pin socket)
    - JTAG buffer for stable download and debug
  • High quality eight layer PCB (Immersion gold)
  • Compact size 1.693" x 2.126" (43 x 54 mm)
  • Tested all I/Os
  • RoHS compliance
  • MADE IN JAPAN

Package Contents

Item Image Quantity
FPGA Board (XCM-114-***) Xilinx Virtex-5 FFG676 FPGA board XCM-114 1
Sockets (HIROSE 80P) HIROSE80 2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Documentation

Price and Add-ons

Description Model
(order code)
FPGA List price
jpy(JPY)
Stock Status
Artix-7 F484 FPGA board XCM-114-35T XC7A35T-1FGG484C
Artix-7 F484 FPGA board XCM-114-50T XC7A50T-1FGG484C
Artix-7 F484 FPGA board XCM-114-75T XC7A75T-1FGG484C
Artix-7 F484 FPGA board XCM-114-100T XC7A100T-1FGG484C
Artix-7 F484 FPGA board XCM-114-200T XC7A200T-1FBG484C
Pitch converter for ACM/XCM-1 series (Type2) ZKB-078KIT -
Pitch Conversion Board for ACM/XCM-1 series (Type3) ZKB-079 -
Pitch converter for ACM/XCM-1 series ZKB-030KIT -
Universal board for ACM/XCM-1 series (Type2) ZKB-103 -
Pitch Conversion Board ACM/XCM-2 series ZKB-041KIT -

Ordering

HOW TO ORDER HuMANDATA PRODUCT