EDX-303 is Xilinx's Hi-performance USB-FPGA Spartan-7 board. It's compact and very simple. 5.0 V external or USB Bus power supply operation. FTDI's FT2232H (Dual channel USB controller IC) is equipped. One channel is available for a user communication interface. The other channel is configured as an I/F for FPGA configuration and configuration device access.
No download cable is needed with original configuration tool " BBC [EDX-303]".
|Maximum Distributed RAM (kb)||600||832||1,100|
|Maximum user I/O pins (Device)||250||338||338|
|Maximum user I/O pins (Board)||56||56||56|
|Total Block RAM (kb)||2,700||3,240||4,320|
This table is for reference. Please refer to official data-sheets for certain information.
|USB-FPGA board (EDX-303)||1|
|USB cable (Type A to Mini B)||1|
There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.
|Spartan-7 USB-FPGA board||EDX-303-50||XC7S50-1FGGA484C|
|Spartan-7 USB-FPGA board||EDX-303-75||XC7S75-1FGGA484C|
|Spartan-7 USB-FPGA board||EDX-303-100||XC7S100-1FGGA484C|
with 3.3V10A DC/DC POWER SUPPLY
|Universal board for ACM/XCM-0 series