Spartan-3AN USB-FPGA board

ft-sp3an ft-usb_config ft-usb_comm

Overview

EDX-005 is an training board equipped with a Xilinx FPGA, power, reset, and clock circuit and configuration device.
EDX-005 have a Xilinx FPGA Spartan-3AN and an FTDI FT2232D for USB interface.
You can do configuration the FPGA via USB interface and can use communication interface by using FTDI’s virtual COM port driver.

*This series was discontinued.

FPGA trainer EDX-005 for XILINX
Click to Zoom
 
FPGA trainer EDX-005 for XILINX
Click to Zoom

Block Diagram

EDX-005
Click to Zoom
 

Specifications

  • Xilinx XC3S200AN-4FTG256C
    Feature XC3S200AN
    System Gates 200 K
    Logic Cells 4,032
    Maximum Distributed RAM bits 28 K
    Maximum user I/O pins(Device) 195
    Maximum user I/O pins(Board) 100
    Total Block RAM bits 288 K
    Multipliers 16
    DCMs 4

    This table is for reference. Please refer to official data-sheets for certain information.

  • USB Configuration(Download cable is not required)
  • FPGA internal SPI Flash memory(Download cable is required)
  • FT2232D(FTDI)for USB interface
  • 100 I/O PAD 100 mil (2.54 mm) grid
  • I/O protective resistances
  • 6 MHz, 50 MHz(50 ppm) Oscillator and External input through CNA/CNB
  • Power-on reset IC
  • JTAG port(7 pin Socket)
  • DC 5.0 V
    (Internal power is generated by an on-board regulator.)
  • Credit-Card-Size 3.386" x 2.126" (86 x 54 mm)
  • Tested all I/O
  • Non-use of 6 Restricted substances of RoHS directive
  • MADE IN JAPAN

Package Contents

Item Image Quantity
FPGA board (EDX-005) FPGA trainer EDX-005 for XILINX 1
Pin Headers 80pinhead 2
Sockets 66pinsocket 2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Documentation

User's manual, Schematic , etc

Price and Add-ons

Description Model
(order code)
FPGA List price
jpy (JPY)
Stock Status
Spartan-3AN USB-FPGA board EDX-005 XC3S200AN-4FTG256C ASK (discontinued)
 
 
 

[ ]