[ACM-115L] Intel Cyclone 10 GX FPGA board

Intel Cyclone 10 GX FPGA board

ft-max10.png 

Overview

ACM-115L is an FPGA board with Intel's High performance FPGA, Cyclone 10 GX. It's compact and very simple. 3.3V single power supply operation.

Rev2: The production of the Power IC (Enpirion) on the board was discontinued. So the part has been changed to the alternative and the board was revised.
For more details, please refer to the circuit schematics.

 

Cyclone 10 GX FPGA board ACM-115L
Click to Zoom

Cyclone 10 GX FPGA board ACM-115L
Click to Zoom

Block Diagram

Block Diagram
Click to Zoom

Typical Eye Diagram

Block Diagram
Click to Zoom
Channel: 1(N)CNB
Ref.Clk：125MHz
Rate：2.5Gbps
VOD Setting：31
Pre-emphasis: 0%
Data: PRBS-7
Device： 10CX105YF672I5G


Click to Zoom
Channel: 0(P)CNA
Ref.Clk：125MHz
Rate：2.5Gbps
VOD Setting：31
Pre-emphasis: 0%
Data: PRBS-7
Device： 10CX105YF672I5G

Specifications

  • FPGA: Cyclone 10 GX
    - 10CX105YF672I5G
    - 10CX150YF672I5G
    - 10CX220YF672I5G
    Feature 10CX105 10CX150 10CX220
    Logic Elements 104,000 150,000 220,000
    Adaptive logic modules (ALMs) 38,000 54,770 80,330
    ALM registers 152,000 219,080 321,320
    M20K memory blocks 382 475 587
    M20K memory size (Kb) 7,640 9,500 11,740
    MLAB memory size (Kb) 799 1,152 1,690
    Variable-precision digital
    signal processing (DSP) blocks    		 125 156 192
    18x19 Multipliers 250 312 384
    Peak fixed-point peformance (GMACS) 225 281 346
    Peak floating-point performance (GFLOPS) 88 109 134
    Maximum user I/O pins (Device) 188 188 188
    Maximum user I/O pins (Board) 128 128 128

    This table is for reference. Please refer to official data-sheets for certain information.

  • 3.3 V single power supply operation
    - 1.8 V, 0.9 V, 1.03 V and 1.35 V are generated on board.
    Note: Power for I/O, VCCOA/VCCOB, is required to be supplied from CNA and CNB.
  • Configuration Device : MT25QU256
  • 128 user I/O (with two 80pin HIROSE connectors)
    Power for I/O of CNA/CNB, VCCOA/VCCOB, are separated. Each power is required to be supplied externally.
    1.2V, 1.25V, 1.35V, 1.5V, 1.8V is suppored.
    Not all I/O is supported LVDS.
    Please refer to the document for FPGA about each I/O standard.
  • On-board Oscillator : 50MHz, 100MHz
    - External inputs are available
  • DDR3L SDRAM (Micron, 4Gbit)
    MT41K512M8DA-107:P (512M x 8)
  • High speed transceivers are connected to user I/O connectors (Tx/Rx pair x2)
    - On-board reference clock (125MHz)
  • User Switch x2 (Push x1, DIP x1)
  • User LED x2
  • Status LED (Power, Done)
  • Power-on Reset IC
  • JTAG Connector (10 pin socket) for download cable connection
    - JTAG buffer for stable download and debug
  • High quality ten layer PCB. (Immersion gold)
  • Compact size 1.693" x 2.126" (43 x 54 mm)
  • Tested all I/O
  • RoHS compliance
  • MADE IN JAPAN

Package Contents

Item Image Quantity
FPGA Board (ACM-115L-**) Intel Cyclone 10 GX ACM-115L 1
Sockets (HIROSE 80P) HIROSE80 2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Documentation

Price and Add-ons

Description Model
(order code)		 FPGA List price
jpy (JPY)		 Stock Status
Cyclone 10 GX FPGA board ACM-115L-105 10CX105YF672I5G
Cyclone 10 GX FPGA board ACM-115L-150 10CX150YF672I5G
Cyclone 10 GX FPGA board ACM-115L-220 10CX220YF672I5G
Universal board for ACM/XCM-1L, 2L series (MAX 1.8 V) ZKB-157L -
Pitch Conversion Board for ACM/XCM-1 series (Type4) ACC-043 -

Ordering

HOW TO ORDER HuMANDATA PRODUCT

 

[ ]