AP68-04 Cyclone III - HuMANDATA LTD.

Altera Cyclone III C25 PLCC68 FPGA Module

*This series was discontinued.

Overview

AP68-04 offers you useful 68pin PLCC FPGA module of Altera high performance Cyclone III.
It's very compact size so you can use AP68-04 in universal board by using DIP PLCC socket. Only one 3.3V single power supply is required. There are 50 user I/Os divided into two Vccio group, an oscillator, LEDs and a configuration device on it.

Top Side

Altera Cyclone III PLCC68　FPGA Module　AP68-04
Click to Zoom

Bottom Side

Altera Cyclone III PLCC68　FPGA Module　AP68-04
Click to Zoom

With Through hole PLCC socket

Click to Zoom

Specifications

Altera EP3C25U256C8N

Feature	EP3C25U256C8N
Logic Elements	24,624
M9K memory blocks	56
Embedded memory (kb)	594
18 x 18 multipliers	66
PLLs	4
Global clock networks	20
Maximum user I/O pins(Device)	156
Maximum user I/O pins(Board)	50

This table is for reference. Please refer to official datasheets for certain information.

Configuration device (Altera: EPCS16)
PLCC 68pin package
3.3 V single power supply operation with on-board 1.2 V and 2.5 V regulators
Separated Vccio (VIO(A) and VIO(B))
On-board Oscillator, 50MHz
One User Switch (Slide)
Two User LEDs (Red)
One Status LED (Config Done:Green)
Power-on Reset IC for stable FPGA configuration
High quality eight layers PCB (Immersion gold)
Compact PLCC size 25.3 x 25.3 mm
Tested all I/O
Non-use of 6 Restricted substances of RoHS directive
MADE IN JAPAN

Package Contents

Item	Image	Quantity
FPGA Module (AP68-04-25)		1

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.