TEST SUITE: Chapter 9 Tests [USB 3 Gen X devices].cvtests
REVISION: 7791
REVISION DATE: 2015-02-12 17:42:18 -0800 (Thu, 12 Feb 2015)
WORKSTATION: DEV8
DATE: Wednesday, September 16, 2015
TIME: 01:20:41 PM
OPERATOR: Miduki
NUMBER OF TESTS: 50
LOG NAME: Chapter 9 Tests - USB 3 Gen X - 2015-09-16 13-18-18
RESULT: passed



InitializeTestSuite
INFO
Test log initialized.
INFO
Log Level: Normal
INFO
User Input module initialized
INFO
Windows 8.1 Pro (Build 9600.17630.amd64fre.winblue_r7.150109-2022)
INFO
CVExe.exe ver 1.5.0.0
INFO
CommandVerifierLog.dll ver 1.5.0.0
INFO
TSMFCGuiDialogHelperDLL.dll ver 1.5.0.0
INFO
TestUtilities.dll ver 1.5.0.0
INFO
TestSuiteEngine.dll ver 1.5.0.0
INFO
xhci_DevIOCTL.dll ver 2.0.1.4
INFO
xhci_TestServices.dll ver 2.0.1.4
INFO
USBUtilities.dll ver 1.4.5.0
INFO
StackSwitcher.dll ver 1.4.5.1
INFO
xhci_USBCommandVerifier.dll ver 2.0.1.4
INFO
Host selected: xHCI Host: VID=0x8086, PID=0x8c31 (PCI й 0, ÇФ¹ 20, _ý 0)
INFO
DUT selected: SS Device addr=3: VID=0403, PID=601e
INFO
Topology: XHCI HC -- DUT
INFO
SuperSpeed Device.
GetNumberOfConfigurations
INFO
USB Version number of device: 3.00
INFO
Number of configurations: 1
TD 9.1 Device Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:24 2015
INFO
Device descriptor length : 0x12
INFO
Device descriptor type : 0x01
INFO
BCD Major version : 0x03
INFO
BCD Minor version : 0x00
INFO
Device class : 0xef, Device class supports different class spec. on different interfaces
INFO
Device class code indicates [Miscellaneous-Device] Device
INFO
Device sub class : 0x02 (Common class)
INFO
Device protocol : 0x01 (Interface Association Descriptor)
INFO
Device sub class : 0x02
INFO
Device protocol assigned by the USB-IF : 0x01
WARNING
Could not open file 'usb.if'.
WARNING
Failed to get vendor information for VendorID : 0x0403
INFO
Device ProductID : 0x601e
INFO
Device BCD : 0x0000
INFO
Running TD 9.8 : String Descriptor Test for iManufacturer : 0x01
INFO
Language : ENGLISH_US String Descriptor : FTDI
INFO
Running TD 9.8 : String Descriptor Test for iProduct : 0x02
INFO
Language : ENGLISH_US String Descriptor : FTDI SuperSpeed-FIFO Bridge
INFO
Running TD 9.8 : String Descriptor Test for iSerialNumber : 0x03
INFO
Language : ENGLISH_US String Descriptor : 000000000001eed-FIFO Bridge
INFO
Number of configurations device supports : 1
INFO
Stop time: Wed Sep 16 13:18:25 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.1 Device Descriptor Test - Device State Default: Number of: Fails (0); Aborts (0); Warnings (2) ]
TD 9.2 Config Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:25 2015
INFO
Interface Association Descriptor found
INFO
Interface Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Interface Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Number of interface descriptors found 2
INFO
Number of alternate interface descriptors found : 0
INFO
Number of endpoint descriptors found : 10
INFO
Configuration descriptor length : 0x09
INFO
Configuration descriptor type : 0x02
INFO
Configuration descriptor TotalLength : 0xa5
INFO
Configuration descriptor NumInterfaces : 2
INFO
Configuration descriptor ConfigurationValue: 0x01
INFO
Running TD 9.8 : String Descriptor Test for iConfiguration : 0x00
INFO
The device omits this string descriptor
INFO
Configuration descriptor bmAttributes : 0xe0
INFO
Device supports remote wake up
INFO
MaxPower = 0x0c PowerMultiplier = 8
INFO
Maximum power device requires : 96mA
INFO
Device is BUS and SELF-POWERED
INFO
Stop time: Wed Sep 16 13:18:26 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.2 Configuration Descriptor Test - Device State Default: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.3 Interface Association Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:26 2015
INFO
Interface Association Descriptor :
INFO
bLength = 0x08
INFO
bDescriptorType = 0x0b
INFO
bFirstInterface = 0
INFO
bInterfaceCount = 2
INFO
bFunctionClass = 0xff
INFO
bFunctionSubClass = 0xff
INFO
bFunctionProtocol = 0xff
INFO
iFunction = 0x00
INFO
Running TD 9.8 : String Descriptor Test for iFunction : 0x00
INFO
Found Interface Descriptor with number : 0
INFO
Found Interface Descriptor with number : 1
INFO
Configuration contains 1 function, with 2 interfaces.
INFO
1 Interface Association Descriptor (containing 2 interfaces).
INFO
Stop time: Wed Sep 16 13:18:27 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.3 Interface Association Descriptor Test (Config 0): Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.4 Interface Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:27 2015
INFO
Bandwidth check passed
INFO
Testing Interface number : 0 Alternate setting : 0
INFO
Interface descriptor length : 0x09
INFO
Interface descriptor bDescriptorType : 0x04
INFO
Interface descriptor bAlternateSetting : 0
INFO
Interface descriptor bNumEndPoints: 2
INFO
Interface descriptor bInterfaceClass is vendor-specific
INFO
Interface descriptor bInterfaceSubClass : 0xFF
INFO
Device uses a vendor-specific protocol for this interface
INFO
Running TD 9.8 : String Descriptor Test for iInterface : 0x00
INFO
The device omits this string descriptor
INFO
Testing Interface number : 1 Alternate setting : 0
INFO
Interface descriptor length : 0x09
INFO
Interface descriptor bDescriptorType : 0x04
INFO
Interface descriptor bAlternateSetting : 0
INFO
Interface descriptor bNumEndPoints: 8
INFO
Interface descriptor bInterfaceClass is vendor-specific
INFO
Interface descriptor bInterfaceSubClass : 0xFF
INFO
Device uses a vendor-specific protocol for this interface
INFO
Running TD 9.8 : String Descriptor Test for iInterface : 0x00
INFO
The device omits this string descriptor
INFO
Stop time: Wed Sep 16 13:18:28 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.4 Interface Descriptor Test - Device State Default: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.5 Endpoint Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:28 2015
INFO
Testing Interface number : 0 Alternate setting : 0
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 1, Direction : OUT
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Interrupt, Number : 1, Direction : IN
INFO
Endpoint descriptor bmAttributes : 0x03
INFO
Endpoint descriptor MaxPacketSize : 64
INFO
Endpoint descriptor interval : 0x09
INFO
Testing Interface number : 1 Alternate setting : 0
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 2, Direction : OUT
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 2, Direction : IN
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 3, Direction : OUT
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 3, Direction : IN
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 4, Direction : OUT
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 4, Direction : IN
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 5, Direction : OUT
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 5, Direction : IN
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Stop time: Wed Sep 16 13:18:29 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.5 Endpoint Descriptor Test - Device State Default: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.6 SuperSpeed Endpoint Companion Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:29 2015
INFO
Testing Interface number : 0 Alternate setting : 0
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 1, Direction : OUT
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x00
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Interrupt, Number : 1, Direction : IN
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x00
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Testing Interface number : 1 Alternate setting : 0
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 2, Direction : OUT
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 2, Direction : IN
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 3, Direction : OUT
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 3, Direction : IN
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 4, Direction : OUT
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 4, Direction : IN
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 5, Direction : OUT
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 5, Direction : IN
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Stop time: Wed Sep 16 13:18:30 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.6 SuperSpeed Endpoint Companion Descriptor Test - Device State Default: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.28 SuperSpeedPlus Isochronous Endpoint Companion Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:30 2015
INFO
Testing Interface number : 0 Alternate setting : 0
INFO
Endpoint Type : Bulk, Number : 1, Direction : OUT
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Interrupt, Number : 1, Direction : IN
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Testing Interface number : 1 Alternate setting : 0
INFO
Endpoint Type : Bulk, Number : 2, Direction : OUT
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 2, Direction : IN
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 3, Direction : OUT
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 3, Direction : IN
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 4, Direction : OUT
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 4, Direction : IN
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 5, Direction : OUT
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 5, Direction : IN
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Stop time: Wed Sep 16 13:18:31 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.28 SuperSpeedPlus Isochronous Endpoint Companion Descriptor Test - Device State Default: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.7 BOS Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:31 2015
INFO
USB Version number of device: 3.00
INFO
BOS descriptor bLength : 0x05
INFO
BOS descriptor bDescriptorType : 0x0f
INFO
BOS descriptor bTotalLength : 0x16
INFO
BOS descriptor bNumDeviceCaps : 0x02
INFO
Number of Device Capability Descriptors found : 2
INFO
Checking BOS Super Speed Descriptor
INFO
Device Supports 5Gbs
INFO
Device Supports High Speed
INFO
Device Supports Full Speed
INFO
Super Speed Capability Descriptor wSpeedsSupported reports Full Speed as lowest supported speed
INFO
Super Speed Capability Descriptor - Functionality Support: High Speed
INFO
BOS Super Speed Capability Descriptor LTM Supported = 0
INFO
BOS Super Speed Capability Descriptor bU1DevExitLat = 0x0a
INFO
BOS Super Speed Capability Descriptor wU2DevExitLat = 0x07ff
INFO
Checking BOS USB 2.0 Extension Descriptor
INFO
bmAttributes:
INFO
LPM Capable = 1
INFO
BESL and Alternate HIRD Supported = 1
INFO
Baseline BESL Valid = 0
INFO
Deep BESL Valid = 0
INFO
Baseline BESL: 0d
INFO
Deep BESL: 0d
INFO
No Platform Descriptor
INFO
Stop time: Wed Sep 16 13:18:32 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.7 BOS Descriptor Test - Device State Default: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.14 Suspend/Resume Test
Passed
INFO
Start time: Wed Sep 16 13:18:32 2015
INFO
Testing the Link State U3
INFO
Setting the parent port of the device to the Link State U3 (Suspend)
INFO
Current Link State: U3(0x3)
INFO
The Link State is U3 (Suspend)
INFO
Setting the parent port of the device to the Link State U0 (Resume)
INFO
Sending a GetDescriptor request with the valid Descriptor type 1
INFO
Port resumed to U0.
INFO
Stop time: Wed Sep 16 13:18:34 2015
INFO
Duration: 2 seconds.
INFO
Stopping Test [ TD 9.14 Suspend/Resume Test - Device State Default: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.19 Time Control Transfer Test
Passed
INFO
Start time: Wed Sep 16 13:18:34 2015
INFO
Control Setup Stage Complete 0 0 us
INFO
Control Data Stage Complete 1 125 us
INFO
Control Status Stage Complete 0 0 us
INFO
Stop time: Wed Sep 16 13:18:35 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.19 Time Control Transfer Test - Device State Default: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.26 Set Isochronous Delay Test
Passed
INFO
Start time: Wed Sep 16 13:18:35 2015
INFO
Sending isochronous delay of 40ns
INFO
Set isochronous delay with value 40ns succeeded
INFO
Stop time: Wed Sep 16 13:18:36 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.26 Set Isochronous Delay Test - Device State Default: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.29 Sublink Speed Test
Passed
INFO
Start time: Wed Sep 16 13:18:36 2015
INFO
Putting device in addressed state.
INFO
Stop time: Wed Sep 16 13:18:37 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.29 Sublink Speed Test - Device State Default: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.1 Device Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:37 2015
INFO
Device descriptor length : 0x12
INFO
Device descriptor type : 0x01
INFO
BCD Major version : 0x03
INFO
BCD Minor version : 0x00
INFO
Device class : 0xef, Device class supports different class spec. on different interfaces
INFO
Device class code indicates [Miscellaneous-Device] Device
INFO
Device sub class : 0x02 (Common class)
INFO
Device protocol : 0x01 (Interface Association Descriptor)
INFO
Device sub class : 0x02
INFO
Device protocol assigned by the USB-IF : 0x01
WARNING
Could not open file 'usb.if'.
WARNING
Failed to get vendor information for VendorID : 0x0403
INFO
Device ProductID : 0x601e
INFO
Device BCD : 0x0000
INFO
Running TD 9.8 : String Descriptor Test for iManufacturer : 0x01
INFO
Language : ENGLISH_US String Descriptor : FTDI00000001eed-FIFO Bridge
INFO
Running TD 9.8 : String Descriptor Test for iProduct : 0x02
INFO
Language : ENGLISH_US String Descriptor : FTDI SuperSpeed-FIFO Bridge
INFO
Running TD 9.8 : String Descriptor Test for iSerialNumber : 0x03
INFO
Language : ENGLISH_US String Descriptor : 000000000001eed-FIFO Bridge
INFO
Number of configurations device supports : 1
INFO
Stop time: Wed Sep 16 13:18:38 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.1 Device Descriptor Test - Device State Addressed: Number of: Fails (0); Aborts (0); Warnings (2) ]
TD 9.2 Config Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:38 2015
INFO
Interface Association Descriptor found
INFO
Interface Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Interface Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Number of interface descriptors found 2
INFO
Number of alternate interface descriptors found : 0
INFO
Number of endpoint descriptors found : 10
INFO
Configuration descriptor length : 0x09
INFO
Configuration descriptor type : 0x02
INFO
Configuration descriptor TotalLength : 0xa5
INFO
Configuration descriptor NumInterfaces : 2
INFO
Configuration descriptor ConfigurationValue: 0x01
INFO
Running TD 9.8 : String Descriptor Test for iConfiguration : 0x00
INFO
The device omits this string descriptor
INFO
Configuration descriptor bmAttributes : 0xe0
INFO
Device supports remote wake up
INFO
MaxPower = 0x0c PowerMultiplier = 8
INFO
Maximum power device requires : 96mA
INFO
Device is BUS and SELF-POWERED
INFO
GetStatus reports Device as currently SELF POWERED
INFO
Stop time: Wed Sep 16 13:18:39 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.2 Configuration Descriptor Test - Device State Addressed: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.3 Interface Association Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:39 2015
INFO
Interface Association Descriptor :
INFO
bLength = 0x08
INFO
bDescriptorType = 0x0b
INFO
bFirstInterface = 0
INFO
bInterfaceCount = 2
INFO
bFunctionClass = 0xff
INFO
bFunctionSubClass = 0xff
INFO
bFunctionProtocol = 0xff
INFO
iFunction = 0x00
INFO
Running TD 9.8 : String Descriptor Test for iFunction : 0x00
INFO
Found Interface Descriptor with number : 0
INFO
Found Interface Descriptor with number : 1
INFO
Configuration contains 1 function, with 2 interfaces.
INFO
1 Interface Association Descriptor (containing 2 interfaces).
INFO
Stop time: Wed Sep 16 13:18:40 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.3 Interface Association Descriptor Test (Config 0): Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.4 Interface Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:40 2015
INFO
Bandwidth check passed
INFO
Testing Interface number : 0 Alternate setting : 0
INFO
Interface descriptor length : 0x09
INFO
Interface descriptor bDescriptorType : 0x04
INFO
Interface descriptor bAlternateSetting : 0
INFO
Interface descriptor bNumEndPoints: 2
INFO
Interface descriptor bInterfaceClass is vendor-specific
INFO
Interface descriptor bInterfaceSubClass : 0xFF
INFO
Device uses a vendor-specific protocol for this interface
INFO
Running TD 9.8 : String Descriptor Test for iInterface : 0x00
INFO
The device omits this string descriptor
INFO
Testing Interface number : 1 Alternate setting : 0
INFO
Interface descriptor length : 0x09
INFO
Interface descriptor bDescriptorType : 0x04
INFO
Interface descriptor bAlternateSetting : 0
INFO
Interface descriptor bNumEndPoints: 8
INFO
Interface descriptor bInterfaceClass is vendor-specific
INFO
Interface descriptor bInterfaceSubClass : 0xFF
INFO
Device uses a vendor-specific protocol for this interface
INFO
Running TD 9.8 : String Descriptor Test for iInterface : 0x00
INFO
The device omits this string descriptor
INFO
Stop time: Wed Sep 16 13:18:41 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.4 Interface Descriptor Test - Device State Addressed: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.5 Endpoint Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:41 2015
INFO
Testing Interface number : 0 Alternate setting : 0
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 1, Direction : OUT
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Interrupt, Number : 1, Direction : IN
INFO
Endpoint descriptor bmAttributes : 0x03
INFO
Endpoint descriptor MaxPacketSize : 64
INFO
Endpoint descriptor interval : 0x09
INFO
Testing Interface number : 1 Alternate setting : 0
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 2, Direction : OUT
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 2, Direction : IN
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 3, Direction : OUT
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 3, Direction : IN
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 4, Direction : OUT
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 4, Direction : IN
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 5, Direction : OUT
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 5, Direction : IN
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Stop time: Wed Sep 16 13:18:42 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.5 Endpoint Descriptor Test - Device State Addressed: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.6 Super Speed Endpoint Companion Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:42 2015
INFO
Testing Interface number : 0 Alternate setting : 0
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 1, Direction : OUT
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x00
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Interrupt, Number : 1, Direction : IN
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x00
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Testing Interface number : 1 Alternate setting : 0
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 2, Direction : OUT
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 2, Direction : IN
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 3, Direction : OUT
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 3, Direction : IN
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 4, Direction : OUT
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 4, Direction : IN
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 5, Direction : OUT
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 5, Direction : IN
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Stop time: Wed Sep 16 13:18:44 2015
INFO
Duration: 2 seconds.
INFO
Stopping Test [ TD 9.6 SuperSpeed Endpoint Companion Descriptor Test - Device State Addressed: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.28 SuperSpeedPlus Isochronous Endpoint Companion Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:44 2015
INFO
Testing Interface number : 0 Alternate setting : 0
INFO
Endpoint Type : Bulk, Number : 1, Direction : OUT
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Interrupt, Number : 1, Direction : IN
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Testing Interface number : 1 Alternate setting : 0
INFO
Endpoint Type : Bulk, Number : 2, Direction : OUT
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 2, Direction : IN
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 3, Direction : OUT
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 3, Direction : IN
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 4, Direction : OUT
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 4, Direction : IN
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 5, Direction : OUT
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 5, Direction : IN
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Stop time: Wed Sep 16 13:18:45 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.28 SuperSpeedPlus Isochronous Endpoint Companion Descriptor Test - Device State Addressed: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.7 BOS Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:45 2015
INFO
USB Version number of device: 3.00
INFO
BOS descriptor bLength : 0x05
INFO
BOS descriptor bDescriptorType : 0x0f
INFO
BOS descriptor bTotalLength : 0x16
INFO
BOS descriptor bNumDeviceCaps : 0x02
INFO
Number of Device Capability Descriptors found : 2
INFO
Checking BOS Super Speed Descriptor
INFO
Device Supports 5Gbs
INFO
Device Supports High Speed
INFO
Device Supports Full Speed
INFO
Super Speed Capability Descriptor wSpeedsSupported reports Full Speed as lowest supported speed
INFO
Super Speed Capability Descriptor - Functionality Support: High Speed
INFO
BOS Super Speed Capability Descriptor LTM Supported = 0
INFO
BOS Super Speed Capability Descriptor bU1DevExitLat = 0x0a
INFO
BOS Super Speed Capability Descriptor wU2DevExitLat = 0x07ff
INFO
Checking BOS USB 2.0 Extension Descriptor
INFO
bmAttributes:
INFO
LPM Capable = 1
INFO
BESL and Alternate HIRD Supported = 1
INFO
Baseline BESL Valid = 0
INFO
Deep BESL Valid = 0
INFO
Baseline BESL: 0d
INFO
Deep BESL: 0d
INFO
No Platform Descriptor
INFO
Stop time: Wed Sep 16 13:18:46 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.7 BOS Descriptor Test - Device State Addressed: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.10 Bad Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:46 2015
INFO
Sending a GetDescriptor call with an invalid Descriptor type 254
INFO
The device responded correctly with a STALL
INFO
Checking to see if the device is still functioning correctly
INFO
Sending a correct GetStatus request for Endpoint Index 0
INFO
The device responded correctly with the status
INFO
Sending a GetDescriptor request with the valid Descriptor type 1
INFO
The device responded correctly with the Device Descriptor
INFO
Stop time: Wed Sep 16 13:18:47 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.10 Bad Descriptor Test - Device State Addressed: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.11 Bad Feature Test
Passed
INFO
Start time: Wed Sep 16 13:18:47 2015
INFO
Sending a SetFeature call with an invalid feature type 47
INFO
The device responded correctly with a STALL
INFO
Checking to see if the device is still functioning correctly
INFO
Sending a correct GetStatus request for Endpoint Index 0
INFO
The device responded correctly with the status
INFO
Sending a GetDescriptor request with the valid Descriptor type 1
INFO
The device responded correctly with the Device Descriptor
INFO
Sending a ClearFeature call with an invalid feature type 47
INFO
The device responded correctly with a STALL
INFO
Checking to see if the device is still functioning correctly
INFO
Sending a correct GetStatus request for Endpoint Index 0
INFO
The device responded correctly with the status
INFO
Sending a GetDescriptor request with the valid Descriptor type 1
INFO
The device responded correctly with the Device Descriptor
INFO
Stop time: Wed Sep 16 13:18:48 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.11 Bad Feature Test - Device State Addressed: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.13 Set Configuration Test
Passed
INFO
Start time: Wed Sep 16 13:18:48 2015
INFO
In Address state:
INFO
Now doing a Set Configuration with Configuration Value 0
INFO
Set Configuration with Configuration Value 0 succeeded
INFO
Now doing a Get Configuration
INFO
Get Configuration for the device returned the correct Configuration Value of 0
INFO
Now doing a Get Descriptor with Configuration Index 0
INFO
Get Descriptor succeeded and returned Configuration Value : 1
INFO
Now doing a Set Configuration with Configuration Value 1
INFO
Set Configuration succeeded with Configuration Value : 1
INFO
In Configured state:
INFO
Now doing a Get Descriptor with Configuration Index 0
INFO
Get Descriptor succeeded and returned Configuration Value : 1
INFO
Now doing a Set Configuration with Configuration Value 1
INFO
Set Configuration succeeded with Configuration Value : 1
INFO
Now doing a Set Configuration with Configuration Value 0
INFO
Unconfigured the device succeeded
INFO
In Address state:
INFO
Now doing a Get Configuration
INFO
Get Configuration for the device returned the correct Configuration Value of 0
INFO
USB Version number of device: 3.00
INFO
Now trying to Set Configuration with an invalid Configuration Value of 2
ERROR
Set Configuration failed for Configuration Value : 2
INFO
Set Configuration operated correctly by failing with an invalid Configuration Value of 2
INFO
Putting device back in Configured state
INFO
Set Configuration succeeded with Configuration Value : 1
INFO
In Configured state:
INFO
Now doing a Get Configuration
INFO
Get Configuration for the device returned the correct Configuration Value of 1
INFO
Now trying to Set Configuration with an invalid Configuration Value of 2
ERROR
Set Configuration failed for Configuration Value : 2
INFO
Set Configuration operated correctly by failing with an invalid Configuration Value of 2
INFO
Now doing a Get Configuration
INFO
Get Configuration for the device returned the correct Configuration Value of 1
INFO
Now doing a Set Configuration with Configuration Value 0
INFO
Unconfigured the device succeeded
INFO
In Address state:
INFO
Stop time: Wed Sep 16 13:18:49 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.13 Set Configuration Test - Device State Addressed: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.14 Suspend/Resume Test
Passed
INFO
Start time: Wed Sep 16 13:18:49 2015
INFO
Testing the Link State U3
INFO
Setting the parent port of the device to the Link State U3 (Suspend)
INFO
Current Link State: U3(0x3)
INFO
The Link State is U3 (Suspend)
INFO
Setting the parent port of the device to the Link State U0 (Resume)
INFO
Sending a GetDescriptor request with the valid Descriptor type 1
INFO
Port resumed to U0.
INFO
Stop time: Wed Sep 16 13:18:50 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.14 Suspend/Resume Test - Device State Addressed: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.19 Time Control Transfer Test
Passed
INFO
Start time: Wed Sep 16 13:18:50 2015
INFO
Control Setup Stage Complete 0 0 us
INFO
Control Data Stage Complete 0 0 us
INFO
Control Status Stage Complete 0 0 us
INFO
Stop time: Wed Sep 16 13:18:51 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.19 Time Control Transfer Test - Device State Addressed: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.26 Set Isochronous Delay Test
Passed
INFO
Start time: Wed Sep 16 13:18:51 2015
INFO
Sending isochronous delay of 40ns
INFO
Set isochronous delay with value 40ns succeeded
INFO
Stop time: Wed Sep 16 13:18:52 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.26 Set Isochronous Delay Test - Device State Addressed: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.27 Set SEL Test
Passed
INFO
Start time: Wed Sep 16 13:18:52 2015
INFO
Sending Set SEL Request: U1SEL=0x20, U1PEL=0x0a U2SEL=0x0815, U2PEL=0x07ff.
INFO
Set SEL request succeeded.
INFO
Stop time: Wed Sep 16 13:18:53 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.27 Set SEL Test - Device State Addressed: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.1 Device Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:53 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
Device descriptor length : 0x12
INFO
Device descriptor type : 0x01
INFO
BCD Major version : 0x03
INFO
BCD Minor version : 0x00
INFO
Device class : 0xef, Device class supports different class spec. on different interfaces
INFO
Device class code indicates [Miscellaneous-Device] Device
INFO
Device sub class : 0x02 (Common class)
INFO
Device protocol : 0x01 (Interface Association Descriptor)
INFO
Device sub class : 0x02
INFO
Device protocol assigned by the USB-IF : 0x01
WARNING
Could not open file 'usb.if'.
WARNING
Failed to get vendor information for VendorID : 0x0403
INFO
Device ProductID : 0x601e
INFO
Device BCD : 0x0000
INFO
Running TD 9.8 : String Descriptor Test for iManufacturer : 0x01
INFO
Language : ENGLISH_US String Descriptor : FTDI00000001eed-FIFO Bridge
INFO
Running TD 9.8 : String Descriptor Test for iProduct : 0x02
INFO
Language : ENGLISH_US String Descriptor : FTDI SuperSpeed-FIFO Bridge
INFO
Running TD 9.8 : String Descriptor Test for iSerialNumber : 0x03
INFO
Language : ENGLISH_US String Descriptor : 000000000001eed-FIFO Bridge
INFO
Number of configurations device supports : 1
INFO
Stop time: Wed Sep 16 13:18:54 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.1 Device Descriptor Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (2) ]
TD 9.2 Config Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:54 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
Interface Association Descriptor found
INFO
Interface Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Interface Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Endpoint Descriptor found
INFO
SuperSpeed USB Endpoint Companion Descriptor found
INFO
Number of interface descriptors found 2
INFO
Number of alternate interface descriptors found : 0
INFO
Number of endpoint descriptors found : 10
INFO
Configuration descriptor length : 0x09
INFO
Configuration descriptor type : 0x02
INFO
Configuration descriptor TotalLength : 0xa5
INFO
Configuration descriptor NumInterfaces : 2
INFO
Configuration descriptor ConfigurationValue: 0x01
INFO
Running TD 9.8 : String Descriptor Test for iConfiguration : 0x00
INFO
The device omits this string descriptor
INFO
Configuration descriptor bmAttributes : 0xe0
INFO
Device supports remote wake up
INFO
MaxPower = 0x0c PowerMultiplier = 8
INFO
Maximum power device requires : 96mA
INFO
Device is BUS and SELF-POWERED
INFO
GetStatus reports Device as currently SELF POWERED
INFO
Stop time: Wed Sep 16 13:18:55 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.2 Configuration Descriptor Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.3 Interface Association Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:55 2015
INFO
Interface Association Descriptor :
INFO
bLength = 0x08
INFO
bDescriptorType = 0x0b
INFO
bFirstInterface = 0
INFO
bInterfaceCount = 2
INFO
bFunctionClass = 0xff
INFO
bFunctionSubClass = 0xff
INFO
bFunctionProtocol = 0xff
INFO
iFunction = 0x00
INFO
Running TD 9.8 : String Descriptor Test for iFunction : 0x00
INFO
Found Interface Descriptor with number : 0
INFO
Found Interface Descriptor with number : 1
INFO
Configuration contains 1 function, with 2 interfaces.
INFO
1 Interface Association Descriptor (containing 2 interfaces).
INFO
Stop time: Wed Sep 16 13:18:56 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.3 Interface Association Descriptor Test (Config 0): Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.4 Interface Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:56 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
Bandwidth check passed
INFO
Get Interface returned bAlternateSetting = 0 Get Descriptor returned bAlternateSetting = 0
INFO
Testing Interface number : 0 Alternate setting : 0
INFO
Interface descriptor length : 0x09
INFO
Interface descriptor bDescriptorType : 0x04
INFO
Interface descriptor bAlternateSetting : 0
INFO
Interface descriptor bNumEndPoints: 2
INFO
Interface descriptor bInterfaceClass is vendor-specific
INFO
Interface descriptor bInterfaceSubClass : 0xFF
INFO
Device uses a vendor-specific protocol for this interface
INFO
Running TD 9.8 : String Descriptor Test for iInterface : 0x00
INFO
The device omits this string descriptor
INFO
Setting Interface for bInterfaceNumber = 0 and bAlternateSetting = 0
INFO
Set Interface for bInterfaceNumber = 0 and bAlternateSetting = 0 succeeded
INFO
Get Interface for Interface number : 0 returned bAlternateSetting = 0
INFO
Testing Interface number : 1 Alternate setting : 0
INFO
Interface descriptor length : 0x09
INFO
Interface descriptor bDescriptorType : 0x04
INFO
Interface descriptor bAlternateSetting : 0
INFO
Interface descriptor bNumEndPoints: 8
INFO
Interface descriptor bInterfaceClass is vendor-specific
INFO
Interface descriptor bInterfaceSubClass : 0xFF
INFO
Device uses a vendor-specific protocol for this interface
INFO
Running TD 9.8 : String Descriptor Test for iInterface : 0x00
INFO
The device omits this string descriptor
INFO
Setting Interface for bInterfaceNumber = 1 and bAlternateSetting = 0
INFO
Set Interface for bInterfaceNumber = 1 and bAlternateSetting = 0 succeeded
INFO
Get Interface for Interface number : 1 returned bAlternateSetting = 0
INFO
Stop time: Wed Sep 16 13:18:57 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.4 Interface Descriptor Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.5 Endpoint Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:57 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
Testing Interface number : 0 Alternate setting : 0
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 1, Direction : OUT
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Interrupt, Number : 1, Direction : IN
INFO
Endpoint descriptor bmAttributes : 0x03
INFO
Endpoint descriptor MaxPacketSize : 64
INFO
Endpoint descriptor interval : 0x09
INFO
Testing Interface number : 1 Alternate setting : 0
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 2, Direction : OUT
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 2, Direction : IN
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 3, Direction : OUT
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 3, Direction : IN
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 4, Direction : OUT
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 4, Direction : IN
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 5, Direction : OUT
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Endpoint descriptor length : 0x07
INFO
Endpoint descriptor type : 0x05
INFO
Endpoint Type : Bulk, Number : 5, Direction : IN
INFO
Endpoint descriptor bmAttributes : 0x02
INFO
Endpoint descriptor MaxPacketSize : 1024
INFO
Endpoint descriptor interval : 0x00
INFO
Stop time: Wed Sep 16 13:18:58 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.5 Endpoint Descriptor Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.6 Super Speed Endpoint Companion Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:58 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
Testing Interface number : 0 Alternate setting : 0
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 1, Direction : OUT
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x00
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Interrupt, Number : 1, Direction : IN
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x00
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Testing Interface number : 1 Alternate setting : 0
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 2, Direction : OUT
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 2, Direction : IN
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 3, Direction : OUT
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 3, Direction : IN
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 4, Direction : OUT
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 4, Direction : IN
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 5, Direction : OUT
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Super Speed USB Endpoint Companion Descriptor:
INFO
Endpoint Type : Bulk, Number : 5, Direction : IN
INFO
wLength = 0x06
INFO
bDescriptorType = 0x30
INFO
bMaxBurst = 0x03
INFO
bmAttributes = 0x00
INFO
wBytesPerInterval = 0x00
INFO
Stop time: Wed Sep 16 13:18:59 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.6 SuperSpeed Endpoint Companion Descriptor Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.28 SuperSpeedPlus Isochronous Endpoint Companion Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:18:59 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
Testing Interface number : 0 Alternate setting : 0
INFO
Endpoint Type : Bulk, Number : 1, Direction : OUT
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Interrupt, Number : 1, Direction : IN
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Testing Interface number : 1 Alternate setting : 0
INFO
Endpoint Type : Bulk, Number : 2, Direction : OUT
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 2, Direction : IN
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 3, Direction : OUT
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 3, Direction : IN
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 4, Direction : OUT
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 4, Direction : IN
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 5, Direction : OUT
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Endpoint Type : Bulk, Number : 5, Direction : IN
INFO
Endpoint does not have a SuperSpeedPlus Isochronous Endpoint Companion Descriptor.
INFO
Stop time: Wed Sep 16 13:19:00 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.28 SuperSpeedPlus Isochronous Endpoint Companion Descriptor Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.7 BOS Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:19:00 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
USB Version number of device: 3.00
INFO
BOS descriptor bLength : 0x05
INFO
BOS descriptor bDescriptorType : 0x0f
INFO
BOS descriptor bTotalLength : 0x16
INFO
BOS descriptor bNumDeviceCaps : 0x02
INFO
Number of Device Capability Descriptors found : 2
INFO
Checking BOS Super Speed Descriptor
INFO
Device Supports 5Gbs
INFO
Device Supports High Speed
INFO
Device Supports Full Speed
INFO
Super Speed Capability Descriptor wSpeedsSupported reports Full Speed as lowest supported speed
INFO
Super Speed Capability Descriptor - Functionality Support: High Speed
INFO
BOS Super Speed Capability Descriptor LTM Supported = 0
INFO
BOS Super Speed Capability Descriptor bU1DevExitLat = 0x0a
INFO
BOS Super Speed Capability Descriptor wU2DevExitLat = 0x07ff
INFO
Checking BOS USB 2.0 Extension Descriptor
INFO
bmAttributes:
INFO
LPM Capable = 1
INFO
BESL and Alternate HIRD Supported = 1
INFO
Baseline BESL Valid = 0
INFO
Deep BESL Valid = 0
INFO
Baseline BESL: 0d
INFO
Deep BESL: 0d
INFO
No Platform Descriptor
INFO
Stop time: Wed Sep 16 13:19:01 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.7 BOS Descriptor Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.9 Halt Endpoint Test
Passed
INFO
Start time: Wed Sep 16 13:19:01 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
Bandwidth check passed
INFO
Get Interface returned bAlternateSetting = 0 Get Descriptor returned bAlternateSetting = 0
INFO
Testing Interface number : 0 Alternate setting : 0
INFO
Interface descriptor length : 0x09
INFO
Interface descriptor bDescriptorType : 0x04
INFO
Interface descriptor bAlternateSetting : 0
INFO
Interface descriptor bNumEndPoints: 2
INFO
Interface descriptor bInterfaceClass is vendor-specific
INFO
Interface descriptor bInterfaceSubClass : 0xFF
INFO
Device uses a vendor-specific protocol for this interface
INFO
Running TD 9.8 : String Descriptor Test for iInterface : 0x00
INFO
The device omits this string descriptor
INFO
Setting Interface for bInterfaceNumber = 0 and bAlternateSetting = 0
INFO
Set Interface for bInterfaceNumber = 0 and bAlternateSetting = 0 succeeded
INFO
Get Interface for Interface number : 0 returned bAlternateSetting = 0
INFO
Found Endpoint Descriptor for Interface number : 0 Alternate setting : 0
INFO
Testing EndPoint type : Bulk, Address : 0x01
INFO
Interrupt/Bulk endpoint. Halt Endpoint Test started
INFO
Endpoint is currently not halted for endpoint 0x01
INFO
Setting feature endpoint halt for endpoint 0x01
INFO
Endpoint is halted for endpoint 0x01
INFO
Clearing feature endpoint halt for endpoint 0x01
INFO
Endpoint is no longer halted for endpoint 0x01
INFO
Found Endpoint Descriptor for Interface number : 0 Alternate setting : 0
INFO
Testing EndPoint type : Interrupt, Address : 0x81
INFO
Interrupt/Bulk endpoint. Halt Endpoint Test started
INFO
Endpoint is currently not halted for endpoint 0x81
INFO
Setting feature endpoint halt for endpoint 0x81
INFO
Endpoint is halted for endpoint 0x81
INFO
Clearing feature endpoint halt for endpoint 0x81
INFO
Endpoint is no longer halted for endpoint 0x81
INFO
Testing Interface number : 1 Alternate setting : 0
INFO
Interface descriptor length : 0x09
INFO
Interface descriptor bDescriptorType : 0x04
INFO
Interface descriptor bAlternateSetting : 0
INFO
Interface descriptor bNumEndPoints: 8
INFO
Interface descriptor bInterfaceClass is vendor-specific
INFO
Interface descriptor bInterfaceSubClass : 0xFF
INFO
Device uses a vendor-specific protocol for this interface
INFO
Running TD 9.8 : String Descriptor Test for iInterface : 0x00
INFO
The device omits this string descriptor
INFO
Setting Interface for bInterfaceNumber = 1 and bAlternateSetting = 0
INFO
Set Interface for bInterfaceNumber = 1 and bAlternateSetting = 0 succeeded
INFO
Get Interface for Interface number : 1 returned bAlternateSetting = 0
INFO
Found Endpoint Descriptor for Interface number : 1 Alternate setting : 0
INFO
Testing EndPoint type : Bulk, Address : 0x02
INFO
Interrupt/Bulk endpoint. Halt Endpoint Test started
INFO
Endpoint is currently not halted for endpoint 0x02
INFO
Setting feature endpoint halt for endpoint 0x02
INFO
Endpoint is halted for endpoint 0x02
INFO
Clearing feature endpoint halt for endpoint 0x02
INFO
Endpoint is no longer halted for endpoint 0x02
INFO
Found Endpoint Descriptor for Interface number : 1 Alternate setting : 0
INFO
Testing EndPoint type : Bulk, Address : 0x82
INFO
Interrupt/Bulk endpoint. Halt Endpoint Test started
INFO
Endpoint is currently not halted for endpoint 0x82
INFO
Setting feature endpoint halt for endpoint 0x82
INFO
Endpoint is halted for endpoint 0x82
INFO
Clearing feature endpoint halt for endpoint 0x82
INFO
Endpoint is no longer halted for endpoint 0x82
INFO
Found Endpoint Descriptor for Interface number : 1 Alternate setting : 0
INFO
Testing EndPoint type : Bulk, Address : 0x03
INFO
Interrupt/Bulk endpoint. Halt Endpoint Test started
INFO
Endpoint is currently not halted for endpoint 0x03
INFO
Setting feature endpoint halt for endpoint 0x03
INFO
Endpoint is halted for endpoint 0x03
INFO
Clearing feature endpoint halt for endpoint 0x03
INFO
Endpoint is no longer halted for endpoint 0x03
INFO
Found Endpoint Descriptor for Interface number : 1 Alternate setting : 0
INFO
Testing EndPoint type : Bulk, Address : 0x83
INFO
Interrupt/Bulk endpoint. Halt Endpoint Test started
INFO
Endpoint is currently not halted for endpoint 0x83
INFO
Setting feature endpoint halt for endpoint 0x83
INFO
Endpoint is halted for endpoint 0x83
INFO
Clearing feature endpoint halt for endpoint 0x83
INFO
Endpoint is no longer halted for endpoint 0x83
INFO
Found Endpoint Descriptor for Interface number : 1 Alternate setting : 0
INFO
Testing EndPoint type : Bulk, Address : 0x04
INFO
Interrupt/Bulk endpoint. Halt Endpoint Test started
INFO
Endpoint is currently not halted for endpoint 0x04
INFO
Setting feature endpoint halt for endpoint 0x04
INFO
Endpoint is halted for endpoint 0x04
INFO
Clearing feature endpoint halt for endpoint 0x04
INFO
Endpoint is no longer halted for endpoint 0x04
INFO
Found Endpoint Descriptor for Interface number : 1 Alternate setting : 0
INFO
Testing EndPoint type : Bulk, Address : 0x84
INFO
Interrupt/Bulk endpoint. Halt Endpoint Test started
INFO
Endpoint is currently not halted for endpoint 0x84
INFO
Setting feature endpoint halt for endpoint 0x84
INFO
Endpoint is halted for endpoint 0x84
INFO
Clearing feature endpoint halt for endpoint 0x84
INFO
Endpoint is no longer halted for endpoint 0x84
INFO
Found Endpoint Descriptor for Interface number : 1 Alternate setting : 0
INFO
Testing EndPoint type : Bulk, Address : 0x05
INFO
Interrupt/Bulk endpoint. Halt Endpoint Test started
INFO
Endpoint is currently not halted for endpoint 0x05
INFO
Setting feature endpoint halt for endpoint 0x05
INFO
Endpoint is halted for endpoint 0x05
INFO
Clearing feature endpoint halt for endpoint 0x05
INFO
Endpoint is no longer halted for endpoint 0x05
INFO
Found Endpoint Descriptor for Interface number : 1 Alternate setting : 0
INFO
Testing EndPoint type : Bulk, Address : 0x85
INFO
Interrupt/Bulk endpoint. Halt Endpoint Test started
INFO
Endpoint is currently not halted for endpoint 0x85
INFO
Setting feature endpoint halt for endpoint 0x85
INFO
Endpoint is halted for endpoint 0x85
INFO
Clearing feature endpoint halt for endpoint 0x85
INFO
Endpoint is no longer halted for endpoint 0x85
INFO
Stop time: Wed Sep 16 13:19:02 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ Halt EndPoint Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.10 Bad Descriptor Test
Passed
INFO
Start time: Wed Sep 16 13:19:02 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
Sending a GetDescriptor call with an invalid Descriptor type 254
INFO
The device responded correctly with a STALL
INFO
Checking to see if the device is still functioning correctly
INFO
Sending a correct GetStatus request for Endpoint Index 0
INFO
The device responded correctly with the status
INFO
Sending a GetDescriptor request with the valid Descriptor type 1
INFO
The device responded correctly with the Device Descriptor
INFO
Stop time: Wed Sep 16 13:19:04 2015
INFO
Duration: 2 seconds.
INFO
Stopping Test [ TD 9.10 Bad Descriptor Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.11 Bad Feature Test
Passed
INFO
Start time: Wed Sep 16 13:19:04 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
Sending a SetFeature call with an invalid feature type 47
INFO
The device responded correctly with a STALL
INFO
Checking to see if the device is still functioning correctly
INFO
Sending a correct GetStatus request for Endpoint Index 0
INFO
The device responded correctly with the status
INFO
Sending a GetDescriptor request with the valid Descriptor type 1
INFO
The device responded correctly with the Device Descriptor
INFO
Sending a ClearFeature call with an invalid feature type 47
INFO
The device responded correctly with a STALL
INFO
Checking to see if the device is still functioning correctly
INFO
Sending a correct GetStatus request for Endpoint Index 0
INFO
The device responded correctly with the status
INFO
Sending a GetDescriptor request with the valid Descriptor type 1
INFO
The device responded correctly with the Device Descriptor
INFO
Stop time: Wed Sep 16 13:19:05 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.11 Bad Feature Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.14 Suspend/Resume Test
Passed
INFO
Start time: Wed Sep 16 13:19:05 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
Testing the Link State U3
INFO
Setting the parent port of the device to the Link State U3 (Suspend)
INFO
Current Link State: U3(0x3)
INFO
The Link State is U3 (Suspend)
INFO
Setting the parent port of the device to the Link State U0 (Resume)
INFO
Sending a GetDescriptor request with the valid Descriptor type 1
INFO
Port resumed to U0.
INFO
Re-enumerating device to make sure that all U1/U2 settings are cleared
INFO
Finding all Interface Descriptors
INFO
Found Interface Descriptor with number : 0 Alternate setting : 0
INFO
Found Interface Descriptor with number : 1 Alternate setting : 0
INFO
Interface Number 0 is the first interface for this function
INFO
Testing suspend/resume of functions individually:
INFO
Setting Interface number 0 to Low power suspend state
INFO
Interface number 0 successfully set to Low power suspend state
INFO
Restoring Interface number 0 to Normal operation state
INFO
Interface number 0 successfully set to Normal operation state
INFO
Testing suspend/resume of all functions and ability to go to U2 - informational only:
INFO
Suspending all functions:
INFO
Setting Interface number 0 to Low power suspend state
INFO
Interface number 0 successfully set to Low power suspend state
INFO
Attempting to put the link into U2:
INFO
Enabling the parent port to accept U2
INFO
Enabling U2 initiation from device side
INFO
Setting the parent port of the device to reject Link State U2
INFO
Resuming all functions:
INFO
Restoring Interface number 0 to Normal operation state
INFO
Interface number 0 successfully set to Normal operation state
INFO
Stop time: Wed Sep 16 13:19:09 2015
INFO
Duration: 4 seconds.
INFO
Stopping Test [ TD 9.14 Suspend/Resume Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.24 U1 U2 Test
Passed
INFO
Start time: Wed Sep 16 13:19:09 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
Testing the Link State U2
INFO
Device will be enabled for U1/U2 entry by SetFeature()
INFO
Sending a Set_Feature(U2_ENABLE)
INFO
Sending a Get_Status to the device
INFO
The device reported that U2 is enabled
INFO
SetFeature(U2_ENABLE) succeeded
INFO
Setting the parent port of the device to initiate the Link State U2 with 256us timeout.
INFO
Current Link State: U2(0x2)
INFO
Link State is U2
INFO
Set Parent Port Link State = U0
INFO
Clearing U1 and U2 settings
INFO
Sending a Clear_Feature(U2_ENABLE)
INFO
The device reported that U2 is disabled
INFO
Verifying that Link State is U0
INFO
Current Link State: U0(0x0)
INFO
Port resumed to U0
INFO
Testing the Link State U1
INFO
Device will be enabled for U1/U2 entry by SetFeature()
INFO
Sending a Set_Feature(U1_ENABLE)
INFO
Sending a Get_Status to the device
INFO
The device reported that U1 is enabled
INFO
SetFeature(U1_ENABLE) succeeded
INFO
Parent port will be configured to initiate U1
INFO
Setting the parent port of the device to initiate the Link State U1 with 1us timeout.
INFO
Current Link State: U1(0x1)
INFO
The Link State is U1.
INFO
Set Parent Port Link State = U0
INFO
Sending a Clear_Feature(U1_ENABLE)
INFO
Current Link State: U0(0x0)
INFO
Port resumed to U0
INFO
Testing U1 and U2 enabled at the same time.
INFO
Device will be enabled for U1/U2 entry by SetFeature()
INFO
Sending a Set_Feature(U1_ENABLE)
INFO
Sending a Get_Status to the device
INFO
The device reported that U1 is enabled
INFO
SetFeature(U1_ENABLE) succeeded
INFO
Sending a Set_Feature(U2_ENABLE)
INFO
Sending a Get_Status to the device
INFO
The device reported that U2 is enabled
INFO
SetFeature(U2_ENABLE) succeeded
INFO
Enable U1 for parent port
INFO
Enabled U2 for parent port
INFO
Current Link State: U2(0x2)
INFO
Sleeping for 520ms
INFO
Current Link State: U2(0x2)
INFO
Current Link State: U2(0x2)
INFO
Link State is U2
INFO
Resuming parent port
INFO
Set Parent Port Link State = U0
INFO
Setting the parent port of the device to reject Link State U1
INFO
Setting the parent port of the device to reject Link State U2
INFO
Sending a Get_Status to the device so link will return to U0
INFO
Sending a Clear_Feature(U2_ENABLE)
INFO
Sending a Clear_Feature(U1_ENABLE)
INFO
The device reported that U2 is disabled
INFO
Clear_Feature(U2_ENABLE) succeeded
INFO
The device reported that U1 is disabled
INFO
Clear_Feature(U1_ENABLE) succeeded
INFO
Current Link State: U0(0x0)
INFO
Port resumed to U0
INFO
Testing the Link State U2
INFO
Device will be enabled for U1/U2 entry by Force Link PM Accept
INFO
Setting the parent port of the device to initiate the Link State U2 with 256us timeout.
INFO
Current Link State: U2(0x2)
INFO
Link State is U2
INFO
Set Parent Port Link State = U0
INFO
Clearing U1 and U2 settings
INFO
The device reported that U2 is disabled
INFO
Verifying that Link State is U0
INFO
Current Link State: U0(0x0)
INFO
Port resumed to U0
INFO
Testing the Link State U1
INFO
Device will be enabled for U1/U2 entry by Force Link PM Accept
INFO
Parent port will be configured to initiate U1
INFO
Setting the parent port of the device to initiate the Link State U1 with 1us timeout.
INFO
Current Link State: U1(0x1)
INFO
The Link State is U1.
INFO
Set Parent Port Link State = U0
INFO
Current Link State: U0(0x0)
INFO
Port resumed to U0
INFO
Testing U1 and U2 enabled at the same time.
INFO
Device will be enabled for U1/U2 entry by Force Link PM Accept
INFO
Enable U1 for parent port
INFO
Enabled U2 for parent port
INFO
Current Link State: U2(0x2)
INFO
Sleeping for 520ms
INFO
Current Link State: U2(0x2)
INFO
Current Link State: U2(0x2)
INFO
Link State is U2
INFO
Resuming parent port
INFO
Set Parent Port Link State = U0
INFO
Setting the parent port of the device to reject Link State U1
INFO
Setting the parent port of the device to reject Link State U2
INFO
Sending a Get_Status to the device so link will return to U0
INFO
The device reported that U2 is disabled
INFO
Clear_Feature(U2_ENABLE) succeeded
INFO
The device reported that U1 is disabled
INFO
Clear_Feature(U1_ENABLE) succeeded
INFO
Current Link State: U0(0x0)
INFO
Port resumed to U0
INFO
Re-enumerating device to make sure that all U1/U2 settings are cleared
INFO
Stop time: Wed Sep 16 13:19:16 2015
INFO
Duration: 7 seconds.
INFO
Stopping Test [ TD 9.24 U1 U2 Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.25 Deferred Packet Test
Passed
INFO
Start time: Wed Sep 16 13:19:16 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
The device is connected at the root port. This test is only run behind a SS hub. Skipping test.
INFO
Stop time: Wed Sep 16 13:19:17 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.25 Deferred Packet Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.27 Set SEL Test
Passed
INFO
Start time: Wed Sep 16 13:19:17 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
Sending Set SEL Request: U1SEL=0x20, U1PEL=0x0a U2SEL=0x0815, U2PEL=0x07ff.
INFO
Set SEL request succeeded.
INFO
Stop time: Wed Sep 16 13:19:18 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.27 Set SEL Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.15 Function Remote Wakeup Enabled Test
Passed
INFO
Start time: Wed Sep 16 13:19:18 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
Testing with Function Remote Wake Enabled
INFO
Finding all Interface Descriptors
INFO
Found Interface Descriptor with number : 0 Alternate setting : 0
INFO
Found Interface Descriptor with number : 1 Alternate setting : 0
INFO
Interface Number 0 is the first interface for this function
INFO
GetStatus for Interface #0 returned 0x1
INFO
GetStatus returned 0x01. Function Remote Wake Capable bit is set
INFO
Enabling Function Remote Wake
INFO
GetStatus for Interface #0 returned 0x3
INFO
GetStatus returned 0x03. Function Remote Wake bit is set
INFO
Suspended the parent port of the device.
INFO
Current Link State: U3(0x3)
INFO
Port link state change detected
INFO
Current Link State: Resume(0xF)
INFO
Resuming the parent port
INFO
Checking for DEV_NOTIFICATION. This may take up to 5 seconds.
INFO
Received notification from host controller: Port Status Change
INFO
Skipping this notification since it is not DEV_NOTIFICATION
INFO
Received notification from host controller: Port Status Change
INFO
Skipping this notification since it is not DEV_NOTIFICATION
INFO
Received notification from host controller: DEV NOTIFICATION
INFO
Notification SubType = 6 DEV NOTIFICATION (should be DEV_NOTIFICATION)
INFO
Notification Type = 1 Function Wake (should be FUNCTION_REMOTE_WAKE)
INFO
Parent port saw remote wakeup
INFO
Received a remote wake up event
INFO
Clearing Port Link State Change bit
INFO
Stop time: Wed Sep 16 13:19:27 2015
INFO
Duration: 9 seconds.
INFO
Stopping Test [ TD 9.15 Function Remote Wakeup Enabled Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.15 Function Remote Wakeup Disabled Test
Passed
INFO
Start time: Wed Sep 16 13:19:27 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
Testing with Function Remote Wake Disabled
INFO
Finding all Interface Descriptors
INFO
Found Interface Descriptor with number : 0 Alternate setting : 0
INFO
Found Interface Descriptor with number : 1 Alternate setting : 0
INFO
Interface Number 0 is the first interface for this function
INFO
GetStatus for Interface #0 returned 0x1
INFO
GetStatus returned 0x01. Function Remote Wake Capable bit is set
INFO
Disabling Function Remote Wake
INFO
GetStatus returned 0x01. Function Remote Wake bit is not set
INFO
Suspended the parent port of the device.
INFO
Current Link State: U3(0x3)
INFO
Current Link State: U3(0x3)
INFO
Resuming the parent port
INFO
Clearing Port Link State Change bit
INFO
Checking for DEV_NOTIFICATION. This may take up to 5 seconds.
INFO
Received notification from host controller: Port Status Change
INFO
Skipping this notification since it is not DEV_NOTIFICATION
INFO
Did not receive a wakeup event on the test device with remote wakeup disabled (correct behavior)
INFO
Clearing Port Link State Change bit
INFO
Stop time: Wed Sep 16 13:19:50 2015
INFO
Duration: 23 seconds.
INFO
Stopping Test [ TD 9.15 Function Remote Wakeup Disabled Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.19 Time Control Transfer Test
Passed
INFO
Start time: Wed Sep 16 13:19:50 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
Control Setup Stage Complete 0 0 us
INFO
Control Data Stage Complete 0 0 us
INFO
Control Status Stage Complete 0 0 us
INFO
Stop time: Wed Sep 16 13:19:51 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.19 Time Control Transfer Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.20 LTM Test
Passed
INFO
Start time: Wed Sep 16 13:19:51 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
USB Version number of device: 3.00
INFO
This device does not support LTM.
INFO
Stop time: Wed Sep 16 13:19:52 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.20 LTM Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.22 Set Feature Test
Passed
INFO
Start time: Wed Sep 16 13:19:52 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
USB Version number of device: 3.00
INFO
This device does not support LTM.
INFO
This device does not support LDM.
INFO
TESTING FEATURE SET/CLEAR. (Feature bit should be set after SET_FEATURE and cleared after CLEAR_FEATURE.)
INFO
Checking U1_Enable feature bit.
INFO
CheckFeatureStatus: U1_Enable is NOT set (as expected)
INFO
U1_Enable bit is SET.
INFO
CLEAR_FEATURE U1_Enable.
INFO
CheckFeatureStatus: U1_Enable is set (as expected)
INFO
SET_FEATURE U1_Enable.
INFO
CheckFeatureStatus: U1_Enable is NOT set (as expected)
INFO
Checking U2_Enable feature bit.
INFO
CheckFeatureStatus: U2_Enable is NOT set (as expected)
INFO
U2_Enable bit is SET.
INFO
CLEAR_FEATURE U2_Enable.
INFO
CheckFeatureStatus: U2_Enable is set (as expected)
INFO
SET_FEATURE U2_Enable.
INFO
CheckFeatureStatus: U2_Enable is NOT set (as expected)
INFO
TESTING FEATURE IN ADDRESSED STATE. (Feature should fail.)
INFO
Testing U1_Enable functionality in Addressed state
INFO
Device Under Test in Addressed state.
INFO
SET_FEATURE(U1_Enable) failed (as expected).
INFO
Device Under Test returned to Configured state.
INFO
Testing U2_Enable functionality in Addressed state
INFO
Device Under Test in Addressed state.
INFO
SET_FEATURE(U2_Enable) failed (as expected).
INFO
Device Under Test returned to Configured state.
INFO
TESTING FEATURE BEHAVIOR AFTER RESET. (U1/U2_ENABLE should be cleared)
INFO
Checking U1_Enable bit after device reset.
INFO
CLEAR_FEATURE: U1_Enable succeeded.
INFO
Device Under Test in Default State.
INFO
Reset port of Device Under Test completed
INFO
Device Under Test in Configured State.
INFO
CheckFeatureStatus: U1_Enable is NOT set (as expected)
INFO
Checking U2_Enable bit after device reset.
INFO
CLEAR_FEATURE: U2_Enable succeeded.
INFO
Device Under Test in Default State.
INFO
Reset port of Device Under Test completed
INFO
Device Under Test in Configured State.
INFO
CheckFeatureStatus: U2_Enable is NOT set (as expected)
INFO
TESTING FEATURE BEHAVIOR AFTER RESET. (LDM_ENABLE should be set)
INFO
Stop time: Wed Sep 16 13:19:53 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.22 Set Feature Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.26 Set Isochronous Delay Test
Passed
INFO
Start time: Wed Sep 16 13:19:53 2015
INFO
Configuration Index 0x00 has a Configuration Value of 1
INFO
Initializing the device to the Configured state with Configuration Value 1
INFO
Sending isochronous delay of 40ns
INFO
Set isochronous delay with value 40ns succeeded
INFO
Stop time: Wed Sep 16 13:19:54 2015
INFO
Duration: 1 second.
INFO
Stopping Test [ TD 9.26 Set Isochronous Delay Test (Configuration Index 0x00) - Device State Configured: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.23 Reset Device Test
Passed
INFO
Start time: Wed Sep 16 13:19:54 2015
INFO
USB Version number of device: 3.00
INFO
Disabling SS Port
INFO
Device should connect on port at High Speed.
INFO
Port 1 Connect bit set
INFO
Port 1 Resetting device because enable bit was not set
INFO
Port 1 Both Connect and Enable bits set.
INFO
Device is connected on 2.0 port
INFO
Issuing GetDescriptor
INFO
Enabling SS Port
INFO
Enabling SS Port by setting link state to Rx.Detect
INFO
Resetting 2.0 Port so device will re-connect at SS
INFO
Port 16 Connect bit set
INFO
Port 16 Both Connect and Enable bits set.
INFO
Device has re-connected on SS port
INFO
Disabling SS Port
INFO
Device should connect on port at High Speed.
INFO
Port 1 Connect bit set
INFO
Port 1 Resetting device because enable bit was not set
INFO
Port 1 Both Connect and Enable bits set.
INFO
Issuing GetDescriptor and SetAddress
INFO
Enabling SS Port by setting link state to Rx.Detect
INFO
Resetting 2.0 Port so device will re-connect at SS
INFO
Port 16 Connect bit set
INFO
Port 16 Both Connect and Enable bits set.
INFO
Device has re-connected on SS port
INFO
Disabling SS Port
INFO
Device should connect on port at High Speed.
INFO
Port 1 Connect bit set
INFO
Port 1 Resetting device because enable bit was not set
INFO
Port 1 Both Connect and Enable bits set.
INFO
Issuing GetDescriptor and SetAddress and SetConfiguration
INFO
Enabling SS Port by setting link state to Rx.Detect
INFO
Resetting 2.0 Port so device will re-connect at SS
INFO
Port 16 Connect bit set
INFO
Port 16 Both Connect and Enable bits set.
INFO
Device has re-connected on SS port
INFO
2.0 device version reported 210
INFO
Stop time: Wed Sep 16 13:20:01 2015
INFO
Duration: 7 seconds.
INFO
Stopping Test [ TD 9.23 Reset Device Test - Device State Default: Number of: Fails (0); Aborts (0); Warnings (0) ]
TD 9.16 Enumeration Test
Passed
INFO
Device is operating at SuperSpeed.
INFO
Start time: Wed Sep 16 13:20:01 2015
INFO
Beginning enumeration test with 150 enumerations. This may take several minutes to complete.
INFO
Device enumerated 150 times.
INFO
Stop time: Wed Sep 16 13:20:41 2015
INFO
Duration: 40 seconds.
INFO
Stopping Test [ TD 9.16 Enumeration Test (repeat 150 times): Number of: Fails (0); Aborts (0); Warnings (0) ]
Display Other Tests To Run
Summary
INFO
Summary Log Counts [ Fails (0); Aborts (0); Warnings (6) ]