Xilinx Kintex-7 FBG484 FPGA board

ft-kintex-7 Transceivers

Overview

XCM-022 is an evaluation board equipped with a XILINX's high performance FPGA, Kintex-7 series (FBG484 package).
XCM-022 series have voltage regulators, oscillators, user LEDs, switches,  and a configuration device on its compact credit-card size board.
Only one 3.3 V single power supply is needed. There are 100 user I/Os divided into two Vcco groups.
By using SIF40 connector with ACC series, you can utilize GTP transceiver (RocketIO).


Rev3: The production of the Power IC (Enpirion) on the board was discontinued. So the part has been changed to the alternative and the board was revised.
For more details, please refer to the circuit schematics.

Rev2: The configuration device on this board is changed to MT25QL128 due to the discontinuance of N25Q064.
Support for Discontinuing Micron Configuration Memory Device.

xilinx fpga board Kintex-7 XCM-022
Click to Zoom

xilinx fpga board Kintex-7 XCM-022
Click to Zoom

Block Diagram


Click to Zoom

Typical Eye Diagram

XCM-022_eye_diagram
Click to Zoom
Device: XC7K70T-1FBG484C
Channel:3_115
Ref.Clk:125MHz
Rate:2.5Gbps
Swing:800mV
Data Pattern: PRBS-7
Pre/Post-Emphasis: 0dB
 

Specifications

  • Xilinx XC7K70T-1FBG484C or XC7K160T-1FBG484C
    FeatureXC7K70TXC7K160T
    Slices 10,250 25,350
    Logic Cells 65,600 162,240
    Maximum Distributed RAM (Kbits) 838 2,188
    Maximum Block RAM (Kbits) 4,860 11,700
    Maximum user I/O pins (Device) 300 400
    Maximum user I/O pins (Board) 100 100
    GTX Channel (Device) 4 4
    GTX Channel (Board) 4 4
    DSP Slices 240 600
    CMT (MMCMx1+PLLx1) 6 8

    This table is for reference. Please refer to official data-sheets for certain information.

  • 100 user I/O, 100 mil (2.54 mm) dual in-line.
    - Separable VCCO
  • Power : 3.3 V single supply
    - 1.0 V/1.2 V/1.5 V/1.8V/2.5 V on-board regulators
    - Controlled power supply (on sequence)
  • On-board Oscillator (50MHz, 200MHz)
  • RocketIO reference clock (125 MHz, 150MHz, External input via MMCX connector)
  • RocketIO Tx/Rx 4ch. (SIF40 Interface)
  • DDR3 SDRAM: MT41J64M16 (Micron, 1Gbit)
  • MRAM: MR2A16AMA35 (Everspin, 4Mbit)
  • Configuration device:
    Rev2: MT25QL128 (Micron, 128Mbit)
    Rev1: N25Q064 (Micron, 64Mbit)
  • User Switch (Push x1, Slide x1)
  • User LED x2
  • Status LED (Power, Done)
  • Power-on Reset IC for FPGA configuration
  • JTAG port (7 pin socket)
  • JTAG buffer for stable download and debug
  • High quality eight layers PCB. (Immersion gold)
  • Credit-Card-Size 3.386"x 2.126" (86 x 54 mm)
  • Tested all I/O
  • Non-use of 6 Restricted substances of RoHS directive
  • MADE IN JAPAN

Package Contents

ItemImageQuantity
FPGA board (XCM-022-***) xilinx fpga board XCM-022 1
Pin Headers 80pinhead 2
Sockets 66pinsocket 2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Price and Accessories

DescriptionModel
(order code)
FPGAList price
jpy(JPY)
Stock Status
Kintex-7 FBG484 FPGA board XCM-022-70T XC7K70T-1FBG484C
Kintex-7 FBG484 FPGA board XCM-022-160T XC7K160T-1FBG484C
Heatsink for FPGA #1 MBA23001-X01 -
Universal board for ACM/XCM-0 series ZKB-054 -
Universal board for ACM/XCM-0 series (Type2) ZKB-105 -
SIF40 to SMA Conversion Board ACC-009 -
SIF40 to MMCX Conversion Board ACC-010 -
SIF40 to SATA Conversion Board ACC-011 -

[

]

 

© HuMANDATA LTD. - Intel (Altera) & Xilinx FPGA Boards manufacturer in Japan - 2017 Sitemap