[XCM-117L] Xilinx Artix UltraScale+ FPGA board

Xilinx Artix UltraScale+ FPGA board

Overview

Xilinx Artix UltraScale+ FFVB676 High Performance FPGA Board. XCM-117L is simple and easy to use. It's Compact size. 3.3V single power supply operation.

Xilinx Artix-7 F484 FPGA board XCM-117L
Click to Zoom

Xilinx Artix-7 F484 FPGA board XCM-117L
Click to Zoom

Block Diagram

Block Diagram XCM-117L
Click to Zoom

Typical Eye Diagram

XCM-117L_eye_diagram
Click to Zoom		 Channel: 224_X0Y0(P)
Ref.Clk: 125MHz
Rate: 2.5Gbps
Swing: 950mVppd (1100)
Pre/Post-cursor: 0 dB
Data: PRBS-7
Trigger: Rising Edge
Signal Path: ZKB-154

Specifications

  • Artix UltraScale+
    - XCAU20P-1FFVB676E
    - XCAU25P-1FFVB676E
    Feature Artix UltraScale+
    XCAU20P XCAU25P
    System Logic Cells 238,437 308,437
    CLB Flip-Flops 218,000 282,000
    CLB LUTs 109,000 141,000
    Maximum Distributed RAM (Mb) 3.2 4.7
    Block RAM Blocks 200 300
    Block RAM (Mb) 7.0 10.5
    UltraRAM Blocks - -
    UltraRAM (Mb) - -
    CMTs (1MMCM,2PLLs) 3 4
    DSP Slices 900 1,200
    System Monitor 1 1
    Max HD I/O (Device) 72 96
    Max HD I/O (Board) 64 64
    Max HP I/O (Device) 156 208
    Max HP I/O (Board) 64 64

    This table is for reference. Please refer to official data-sheets for certain information.

  • 128 user I/Os (with two 80pin HIROSE connectors)
      CNA: 64 user I/O (HD) / CNB: 64 user I/O (HP)
    * External power is needed for I/O (VCCOA/VCCOB)
    * HD = High-density I/O with support for I/O voltage from 1.2V to 3.3V.
    * HP = High-performance I/O with support for I/O voltage from 1.0V to 1.8V.
  • Power : 3.3V, VCCOA, VCCOB
    - VCCINT, 0.9V, 1.2V, 1.8V, 1.35V, 0.675V are generated by on-board regulators
    - Sequenced power supplies (Power on)
  • on board clocks
    - 50 MHz, 200 MHz (LVDS)
    - External inputs（CNA/CNB)
  • Separable VCCO
  • GTY Transceivers
    TX/RX 2ch.
    reference clocks: 125 MHz and external input (MMCX connectors)
  • Configuration Device:
    Quad SPI ROM : MT25QU128 (Micron, 128Mbit)
  • DDR3L SDRAM: MT41K64M16TW-107:P (Micron, 1Gbit)
  • Power-on Reset IC for FPGA configuration
  • User Switch x 2 (Push x1, DIP x1bit)
  • User LED x 1
  • Status LED x2 (Power, Done)
  • JTAG port (7 pin socket)
  • JTAG buffer for stable download and debug
  • Controlled I/O path length
  • High quality ten layer PCB (Immersion gold)
  • Compact size 1.693" x 2.126" (43 x 54 mm)
  • Tested all I/Os
  • RoHS compliance
  • MADE IN JAPAN

Package Contents

Item Image Quantity
FPGA Board (XCM-117L-***) Xilinx Virtex-5 FFG676 FPGA board XCM-117L 1
Sockets (HIROSE 80P) HIROSE80 2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Documentation

Price and Add-ons

Description Model
(order code)		 FPGA List price
jpy(JPY)		 Stock Status
Artix UltraScale+ FFVB676 FPGA board XCM-117L-20P XCAU20P-1FFVB676E
Artix UltraScale+ FFVB676 FPGA board XCM-117L-25P XCAU25P-1FFVB676E
Universal board for ACM/XCM-1L, 2L series (MAX 1.8 V) ZKB-157L -
Pitch Conversion Board for ACM/XCM-1 series (Type4) ACC-043 -

Ordering

HOW TO ORDER HuMANDATA PRODUCT

 

[ ]