Altera Cyclone V USB-FPGA board

Cyclone V MRAM usb_config usb_comm HI-SPEED

Overview

EDA-008 is Altera Corp.'s Hi-performance USB-FPGA Cyclone V board. It's compact and very simple. Single 5.0 V power supply operation. FTDI's FT2232H (Dual channel USB controller IC) is equipped. One channel is available for a user communication interface. The other channel is configured for FPGA configuration and configuration device access.

No download cable is needed with original configuration tool " BBC[EDA-008]".


Rev2: The production of the Power IC (Enpirion) on the board was discontinued. So the part has been changed to the alternative and the board was revised. For more details, please refer to the circuit schematics.

Please also consider listed below.

  • ACM-027 : without USB I/F version.
  • ACM-027Z : without USB I/F and MRAM version.


 

CycloneV USB-FPGA Board EDA-008
Click to Zoom

CycloneV USB-FPGA Board EDA-008
Click to Zoom

Block Diagram

Block Diagram EDA-008
Click to Zoom

Reference Data

USB compliance test. Eye pattern of upstream tests.

EDA008_USBCompEye
Click to Zoom

Specifications

  • Altera 5CEBA4F23C8N
    Feature 5CEBA4F23C8N
    Logic Elements 49 K
    Embedded memory(Kbits) 3,383
    18 x 18 Multipliers 132
    PLLs 4
    Global Clock Networks 16
    Maximum user I/O pins(Device) 224
    Maximum user I/O pins(Board) 100

    This table is for reference. Please refer to official data-sheets for certain information.

  • Power : 5.0 V single power supply operation
  • MRAM: MR2A16AMA35 (Everspin, 4Mbit)
  • 100 I/O PAD 100 mil (2.54 mm) grid
  • Separated VCCIO input (VIO(B))
  • Configuration Device
  • USB control IC (FTDI, FT2232H)
    - FPGA Configuration
    - Configuration device access (Write/Reset/Erase)
    - User communication I/F
    - Free Original Configuration Tool " BBC[EDA-008]"
  • ESD protection component for USB I/F
  • 50MHz Oscillator (50 ppm) and External clock inputs
  • User Switch (Push x1, DIP x1bit)
  • User LED x2
  • Status LED (Power, Done)
  • Power-on Reset
  • JTAG Connector(10 pin socket) for download cable connection
    - JTAG buffer for stable download and debug
  • High quality eight layers PCB (Immersion gold)
  • Credit-Card-Size 3.386"x 2.126" (86 x 54 mm)
  • Tested all I/O
  • RoHS compliance
  • MADE IN JAPAN

Package Contents

Item Image Quantity
USB-FPGA board (EDA-008) CycloneV FPGA Board EDA-008 1
USB cable (Type A to B)   1
Pin Headers 80pinhead 2
Sockets 66pinsocket 2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Price and Add-ons

Description Model
(order code)
FPGA List price
jpy(JPY)
Stock Status
CycloneV USB-FPGA board EDA-008 5CEBA4F23C8N
Universal board
with 3.3V10A DC/DC POWER SUPPLY
ZKB-054 -

[]

© HuMANDATA LTD. - Intel (Altera) & Xilinx FPGA Boards manufacturer in Japan - 2017 Sitemap