Xilinx Kintex-7 USB-FPGA board with FTDI USB3.0 bridge IC
Overview
EDX-009 is Xilinx Corp.'s Hi-performance Kintex-7 USB-FPGA board. EDX-009 is compact and very simple. EDX-009 operates with single 5.0V power supply. An FTDI's FT600 offers USB3.0 bridge to FPGA user communication I/F. An FT232H is mounted for FPGA configuration.
No download cable is needed to configure the FPGA with HuMANDATA original configuration tool "BBC[EDX-009]".
Rev3: The configuration device on this board is changed to MT25QL128 due to the discontinuance of N25Q128.
» Please also see other FT600 series products.
Block Diagram
Specifications
- XILINX XC7K70T-1FBG484C or XC7K160T-1FBG484C
Feature XC7K70T XC7K160T Logic Cell 65,600 162,240 Slice 10,250 25,350 Max Distributed RAM (kb) 838 2,188 Max Block RAM (kb) 4,860 11,700 DSP Slice 240 600 CMT (MMCMx1+PLLx1) 6 8 Maximum user I/O pins(Device) 300 400 Maximum user I/O pins(Board) 100 100 This table is for reference. Please refer to official data-sheets for certain information.
- Power : 5.0 V single power supply operation
- Separated VCCIO input (VIO(B)) - 100 I/O PAD 100 mil (2.54 mm) grid
- DDR3 SDRAM: MT41K64M16 (Micron, 1Gbit)
High density is available by a BTO up to 4Gbit - Configuration Device
Rev3: Quad SPI ROM : MT25QL128 (Micron, 128Mbit)
Rev1, 2: Quad SPI ROM: N25Q128 (Micron, 128Mbit) - USB3.0 bridge IC (FTDI, FT600)
- User communication I/F - USB2.0 bridge IC (FTDI, FT232H)
- User communication I/F
- FPGA Configuration
- Configuration device access (Write/Reset/Erase)
- Free Original Configuration Tool " BBC[EDX-009]" - ESD protection for USB2.0 I/F
- 50MHz Oscillator (50 ppm)
- External clock inputs are avairable - User Switch x2 (Push x1, Slide x1)
- User LED x2
- Status LED x2 (Power, Done)
- Power-on Reset
- JTAG Connector(7 pin socket) for download cable connection
- JTAG buffer for stable download and debug - High quality 8 layers PCB (Immersion gold)
- Credit-Card-Size 3.386"x 2.126" (86 x 54 mm)
- Tested all I/O
- RoHS compliance
- MADE IN JAPAN
Reference Data
- USB SuperSpeed connection check by a USB 3.0 test tool
- USB HighSpeed Compliance Test. Eye pattern of upstream tests. (FT600)
- USB HighSpeed Compliance Test. Eye pattern of upstream tests. (FT232H)
Package Contents
Item | Image | Quantity |
---|---|---|
USB-FPGA board (EDX-009) | 1 | |
USB3.0 cable (Type A to B) | 1 | |
Pin Headers | 2 | |
Sockets | 2 |
There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.
Documentation
Price and Add-ons
Description | Model (order code) |
FPGA | List price (JPY) |
Stock Status |
---|---|---|---|---|
USB 3.0 with Kintex-7 USB-FPGA board | EDX-009-70T | XC7K70T-1FBG484C | ||
USB 3.0 with Kintex-7 USB-FPGA board | EDX-009-160T | XC7K160T-1FBG484C | ||
Universal board with 3.3V10A DC/DC POWER SUPPLY |
ZKB-054 | - |
[]